Vintage Sewing Machine Shop Machine Photos
03-25-2020, 01:41 PM
#2312
Member
Join Date: Mar 2020
Posts: 2
Hi, OurWorkbench and Glenn. Thanks for replying.
I thought it might be a German machine because of the use of V and R for forward and reverse, and thought that the name many have been removed because it was a German Machine being sold in England (where I live) at a time when there was some tension between the two countries (one of the wars).
The only thing that made me think Frister and Rossman was the pattern on the wooden base.
I thought it might be a German machine because of the use of V and R for forward and reverse, and thought that the name many have been removed because it was a German Machine being sold in England (where I live) at a time when there was some tension between the two countries (one of the wars).
The only thing that made me think Frister and Rossman was the pattern on the wooden base.
03-26-2020, 06:39 PM
#2313
Super Member
Join Date: Mar 2015
Location: Denver, CO
Posts: 4,285
I knew I had seen that badge somewhere. I finally figured out where and possibly a closer match to your machine. It appears that badge is for a distributor of sewing machines per http://needlebar.org/main/logos/silberberg/index.html I also found http://needlebar.org/nbwiki/index.php/Chris and scroll down to Anker Model P Treadle Machine.
That is a beautiful machine. Glad that it stitches well. Hand cranks are fun.
Janey - Neat people never make the exciting discoveries I do.
Not affiliated with off-site link(s)
That is a beautiful machine. Glad that it stitches well. Hand cranks are fun.
Janey - Neat people never make the exciting discoveries I do.
Not affiliated with off-site link(s)
03-27-2020, 05:01 AM
#2315
Super Member
Join Date: Mar 2010
Location: Huntsville, AL
Posts: 2,609
Lets try this for a photo of My Gloria ( Anker. Hentensburg) Very much the same as a Singer 28, uses a 15X1 needle and same shuttle. Yes a German made machine so you were not far off on this one. It is much like the Jones CS
Last edited by Glenn; 03-27-2020 at 05:05 AM.
04-10-2021, 03:38 PM
#2316
Member
Join Date: Jul 2017
Posts: 6
A Great Old Machine that will outlive me
Here is my first White.
A late 1940's Model 77, this is the heavy steel cast unit, not the lightweight 77MG mag. alloy cast.
The art deco lines, green color and crinkle finish really speak to me. I love to look at her and she sews great too. I love the sound and feel of turning on the light using the heavy toggle switch just under her arm. The wheel plating is still very nice and feels great in your hand. Independent settings for forward and backward stitch length, and a great little gearshift to throw it in forward or reverse. She has a forward facing bobbin, and a large cover plate that flips up for access. (My fingers are fat, so I still tip her back to change the bobbin.) The bobbin winder makes a nice solid sound when it finishes winding. I really like the knee control in her cabinet, its easier for me to control than a foot pedal. Plus to me, she looks great from every angle.
Her weakness? Well,.. she's a friction drive, so you can forget about going treadling with her. The 65 watt 110v (.7 amp?) friction drive motor works great, just no practical way to treadle. And her dials look very nice but,... they're plastic. I know, you can't tell by looking but the tension, forward, and reverse dials are all plastic. I still think she is a straight-stitch goddess.
A great post war example of a USA machine from Cleveland Ohio.
A late 1940's Model 77, this is the heavy steel cast unit, not the lightweight 77MG mag. alloy cast.
The art deco lines, green color and crinkle finish really speak to me. I love to look at her and she sews great too. I love the sound and feel of turning on the light using the heavy toggle switch just under her arm. The wheel plating is still very nice and feels great in your hand. Independent settings for forward and backward stitch length, and a great little gearshift to throw it in forward or reverse. She has a forward facing bobbin, and a large cover plate that flips up for access. (My fingers are fat, so I still tip her back to change the bobbin.) The bobbin winder makes a nice solid sound when it finishes winding. I really like the knee control in her cabinet, its easier for me to control than a foot pedal. Plus to me, she looks great from every angle.
Her weakness? Well,.. she's a friction drive, so you can forget about going treadling with her. The 65 watt 110v (.7 amp?) friction drive motor works great, just no practical way to treadle. And her dials look very nice but,... they're plastic. I know, you can't tell by looking but the tension, forward, and reverse dials are all plastic. I still think she is a straight-stitch goddess.
A great post war example of a USA machine from Cleveland Ohio.
White Model 77 made in Cleveland Ohio
Attachment 274688
Friction drive works great
Attachment 274689
She doesn't have a bad side
Attachment 274690
Attachment 274688
Friction drive works great
Attachment 274689
She doesn't have a bad side
Attachment 274690
09-09-2021, 04:07 AM
#2317
Member
Join Date: Sep 2021
Posts: 1
OMG! We need to talk!
Where did you find the decals for your Raymond? Mine is a 1907Attachment 314618
and yes, she sews!! So excited! The beaver and the flower are decals all the rest was hand painted enamel and gold leaf with 3 top coats of clear.[/QUOTE]
and yes, she sews!! So excited! The beaver and the flower are decals all the rest was hand painted enamel and gold leaf with 3 top coats of clear.[/QUOTE]
09-09-2021, 03:09 PM
#2319
Senior Member
Join Date: Apr 2020
Location: South of St Louis
Posts: 822
Where did you find the decals for your Raymond? Mine is a 1907Attachment 314618
and yes, she sews!! So excited! The beaver and the flower are decals all the rest was hand painted enamel and gold leaf with 3 top coats of clear.
and yes, she sews!! So excited! The beaver and the flower are decals all the rest was hand painted enamel and gold leaf with 3 top coats of clear.
Welcome to the Board, and what a great looking machine!!
And with Leon, I think the vertical leaf tension is very neat!
05-23-2023, 01:14 PM
#2320
Member
Join Date: May 2023
Posts: 1
Singer 96K49
I'm looking for a copy of a manual for an Industrial Sewing Machine (Quilting Machine) model# 96K49 and it also has a bobbin winder that is not attached it is a tabletop bobbin winder. Any information would be appreciated.
Thread
Thread Starter
Forum
Replies
Last Post
Lostn51
For Vintage & Antique Machine Enthusiasts
44789
01-17-2016 05:34 AM
Caroline94535
For Vintage & Antique Machine Enthusiasts
4
07-03-2015 07:29 PM
Candace
For Vintage & Antique Machine Enthusiasts
14
12-09-2013 07:55 AM
danandsassy
For Vintage & Antique Machine Enthusiasts
17
05-14-2011 06:26 AM
