Go Back  Quiltingboard Forums > Main
Learning applique >

Learning applique

Learning applique

Old 01-20-2013, 08:43 AM
  #1  
Senior Member
Thread Starter
 
vivientan's Avatar
 
Join Date: Aug 2010
Location: Singapore
Posts: 331
Default Learning applique

I've been doing traditional piecing for the past few years and think I should progress into applique. I've attended a machine applique class 2 years ago but find it pretty challenging as I can't quite estimate when to stop & turn, what angle to turn etc. The stitches turned out very uneven and ugly! Would hand applique be an easier technique for a beginner?

I'm using the Heat n Bond fusible web. I remembered that my teacher worked with a stablizer underneath the fabric. Is that necessary?

Grateful if anyone could point me to good tutorials online which I could follow as a beginner. Thanks!
vivientan is offline  
Old 01-20-2013, 09:17 AM
  #2  
Super Member
 
Join Date: May 2011
Location: Pacific NW
Posts: 9,344
Default

Erin Russek's website has both video and picture tutorials that are very good and very detailed.

http://erinrussek.typepad.com/one-pi...lique-lessons/
Peckish is offline  
Old 01-20-2013, 09:23 AM
  #3  
Super Member
 
trif's Avatar
 
Join Date: Jan 2010
Location: Orange county, CA
Posts: 1,449
Default

Practice practice......
If you want, you can also use clear thread, that way you can continue to improve your stitches and still feel good about the projects you are completing.
trif is offline  
Old 01-20-2013, 09:26 AM
  #4  
Super Member
 
Scissor Queen's Avatar
 
Join Date: Jul 2009
Location: Southwest Kansas
Posts: 4,820
Default

You don't say what stitches you're using to stitch the edges of your applique. Mostly it just takes practice. And no matter how uneven and ugly you think your stitches are if you put it away for a couple of days and then look at it from normal viewing distance chances are you won't even be able to find the one or two misplaced stitches anymore.

I've used invisible thread with a straight stitch and a teeny zig zag, matching threads with a straight stitch and a blanket stitch, contrasting threads with straight and blanket stitches. I never use a satin stitch and I never use a stabilizer.
Scissor Queen is offline  
Old 01-20-2013, 09:28 AM
  #5  
Power Poster
 
Join Date: Dec 2010
Location: Michigan
Posts: 11,276
Default

Have your sewing skills improved in the last couple of years since you took the class? If so, you may want to try machine applique again. The stablizer is optional for machine applique, but helps to keep the stitches from bunching up the fabric.
There are a couple of good books out there, but don't know their availability where you live:
http://www.amazon.com/Applique-Basic...words=applique

http://www.amazon.com/Mastering-Mach...lique+hargrove

both books cover many types of hand and machine applique.
PaperPrincess is offline  
Old 01-20-2013, 09:40 AM
  #6  
Power Poster
 
Join Date: Aug 2008
Location: new york state
Posts: 10,118
Default

Its a matter of choice but I always use a stablizer under mine. It keeps my work smooth and flat. No bunching of the fabric.
zennia is offline  
Old 01-20-2013, 10:03 AM
  #7  
Super Member
 
Join Date: Jan 2011
Location: Central Minnesota
Posts: 1,751
Default

Just yesterday I watched Jan Patek's 4 part tutorial on MSQC about hand applique and am anxious to try her method. Up until this time I alwasy did machine applique, just practice, practice on a piece if that is the way you want to do it.
Iamquilter is offline  
Old 01-20-2013, 10:59 AM
  #8  
Super Member
 
JulieR's Avatar
 
Join Date: May 2010
Location: Emmitsburg, MD
Posts: 1,599
Default

For machine applique you'll definitely want a stabilizer under there, and if it's been a while you should give it another shot -- or five; like anything else it takes practice!

However, no matter how much I practice I still feel like an oaf when I use machine applique, so I've changed entirely over to all hand applique. Turns out I like the technique and the results much better, too.

Definitely search for applique techniques on YouTube; I found a lot of fantastic information there when I was starting out, and still search for new nuggets of information all the time.
JulieR is offline  
Old 01-20-2013, 11:00 AM
  #9  
Power Poster
 
Join Date: Dec 2008
Location: Western Wisconsin
Posts: 12,930
Default

It can be challenging to hand applique pieces that are fused. There are so many different ways to machine applique fused pieces, if you experiment a little you are bound to find a method that you like.

I found the book by Harriet Hargrave to be very valuable for showing how to do the various techniques. I was able to teach myself using that book. Here is a link to it on Amazon:
http://www.amazon.com/Mastering-Mach...dp/157120136X/
Actually, mine is the older edition of this book:
http://www.amazon.com/Mastering-Mach...dp/0914881450/

I tried satin stitching, but I don't like the way it stiffens the applique.

You do need to use a stabilizer underneath machine applique unless you do what I do -- which is to heavily starch the background fabric first. I use a 1:1 solution of Sta-Flo liquid laundry starch and water, "paint" this on using a large wall painting brush until fabric is saturated, wait a minute to allow the starch to be absorbed, toss in dryer, then iron with steam. This stiffens the fabric sufficiently to eliminate the need for a stabilizer.

You also need to learn about fusibles. I have migrated to using Misty Fuse for fused machine applique work because it leaves the fabric very soft. Heat and Bond, in contrast, stiffens the applique quite a bit.

I have done hand applique (with turned under edges) and love the result. However, my hands and arthritis are such that I cannot use a needle like that for more than a few minutes at a time. Hand applique is slow compared to machine applique.

Last edited by Prism99; 01-20-2013 at 11:03 AM.
Prism99 is offline  
Old 01-26-2013, 09:01 AM
  #10  
Senior Member
Thread Starter
 
vivientan's Avatar
 
Join Date: Aug 2010
Location: Singapore
Posts: 331
Default

Thanks to all for your replies. They've been most helpful! If I'm using a zig zag stitch for machine applique, what's the recommended stitch length and width? Should I go really slow?
vivientan is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
moonwork42029
Main
80
10-20-2022 12:35 AM
vivientan
Main
18
10-20-2010 01:26 AM
anglgrl
Pictures
37
08-11-2010 07:00 PM
sewgirl
Main
6
06-24-2010 01:31 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter