54/40 or fight
06-15-2011, 05:25 PM
#11
Power Poster
Join Date: May 2008
Location: MN
Posts: 24,476
Look at this page from quilter's cache - it gives some VERY HELPFUL information on how to construct the triangle in a square unit.
http://www.quilterscache.com/F/Fifty...ock_Page2.html
I think the easiest way to get a certain unit size is to draft the square - draw the triangle in it - cut it apart - add 1/4 inch seam allowances to the pieces.
Sewing two rectangles on the diagonal (like for HSTs) - and cutting down the center - will result in kite shaped pieces.
http://www.quilterscache.com/F/Fifty...ock_Page2.html
I think the easiest way to get a certain unit size is to draft the square - draw the triangle in it - cut it apart - add 1/4 inch seam allowances to the pieces.
Sewing two rectangles on the diagonal (like for HSTs) - and cutting down the center - will result in kite shaped pieces.
06-15-2011, 05:30 PM
#12
Power Poster
Join Date: May 2008
Location: MN
Posts: 24,476
http://www.quiltingboard.com/t-22708-1.htm
If you read all of this thread, it might help with understanding and constructing the triangle in a square unit.
If you read all of this thread, it might help with understanding and constructing the triangle in a square unit.
06-15-2011, 08:06 PM
#13
Power Poster
Join Date: Apr 2011
Location: Ontario, Canada
Posts: 17,728
Originally Posted by Jan in VA
Originally Posted by QuiltE
It could be done simple enough, similar to a snowball. Start out with the square the size you want it. Mark on the centre point at bottom and draw lines to the top for the V. Then lay on a piece of fabric. Stitch. Do other side.
You sew down the length of the middle, just as you would a square on a corner.
Jan in VA
Thread
Thread Starter
Forum
Replies
Last Post
mamatobugboo
General Chit-Chat (non-quilting talk)
5
05-09-2009 06:55 PM
