Applique turn-unders
10-17-2012, 02:42 PM
#12
Super Member
Join Date: Mar 2010
Location: Ridgefield WA
Posts: 7,765
Yep, I agree! After much trial and error, that is also the method I use. (I use template plastic shapes to iron the "seam allowances" under then glue baste and sew it on already turned!
Originally Posted by QuiltyReese
I use starch and an iron to press my seams under. Then I glue baste my pieces on to the background. It takes a bit of time but I love the results. All of my curves and points are perfect. All I have to do is get comfy and sit on the couch and sew. I don't have to worry about turning anything under. Its perfect with the kids and I have to set my work down at any give point. My favorite blog describing this technique is http://erinrussek.typepad.com/. Its great and her designs are super cute.
10-18-2012, 04:00 AM
#15
Super Member
Join Date: Jul 2010
Location: Glenmoore, PA
Posts: 7,941
Originally Posted by Imakequilts
I used to baste my 1/4 inch turn-under on my applique pieces. This sometimes left edges that were not smooth.
I found a simpler method-- run a basting stitch 1/4 inch in from the edge and after tacking the piece in position, using your needle, turn it under as you go using the thread as your guide. Remove the basting thread when completed..
I found a simpler method-- run a basting stitch 1/4 inch in from the edge and after tacking the piece in position, using your needle, turn it under as you go using the thread as your guide. Remove the basting thread when completed..
10-18-2012, 04:27 AM
#16
Super Member
Join Date: Sep 2011
Location: Canadian in Minnesota
Posts: 3,078
For perfect circles, I use the dryer sheet method but haven't had much luck when using that method when appliqueing alphabet letters. I do run a line of stitching along the edge and use the needle turn method to turn the edges up to that line of sewing and am always impressed by people who can make an entire applique quilt.
10-18-2012, 05:32 AM
#17
Junior Member
Join Date: Jul 2011
Posts: 192
Finger-press, finger -press finger-press!!!!!!!!!!! i learned the hard way to finger press all pieces before I try to applique. No one told me to do this and it makes life so much easier when you applique and don't forget to make sure all your pieces are cut on the bias.....no trouble with curves then. The fabric has a memories and turns under so much easier. I also, use a toothpick to turn under and not the needle. I keep the toothpick in my mouth and it is slightly damp and turn under is so much easier but remember..........finger press!!!
10-18-2012, 09:01 AM
#18
Super Member
Join Date: Mar 2011
Location: Canada
Posts: 1,386
I do the needle turn method, and with the assistance of the Fons and Porter glue stick, and finger pressing, my points and curves are so much better. It just takes a little practise to master this method, and patience goes a long way in the beginning. I have also tried back basting, which I also like, and things turn very easily and smooth.
10-18-2012, 09:25 AM
#19
Member
Join Date: Oct 2010
Location: Albuquerque, NM
Posts: 13
Back Basting & Washable Markers
I use combination of back basting with washable markers, that I have drawn on the back of the fabric block. ck When I needle turn (or more appropriately - toothpick turn) I can see the blue washable marker from the top and know that I'm right on track. After the block is done, I need to rinse WITHOUT detergent it to ensure the blue washable marker comes out. Sometimes I like to take one of those pigma permanent fine markers and mark on top of the fabric and turn it under, hiding the mark - but I have to be on top of my game to do that! Those round toothpicks at Cracker Barrel are my favorite!
Thread
Thread Starter
Forum
Replies
Last Post
lfw045
Links and Resources
5
08-22-2008 03:20 AM
