Backing for wall hanging
10-12-2019, 12:15 PM
#12
Super Member
Join Date: Sep 2008
Location: New England, USA
Posts: 2,959
I could make a point for either satin or a cotton backing but I think satin, while it may be over kill, would be classy and go with the front.
On a side note, when I do a larger wall hanging now a days or one that will have some weight to it, I do two sleeves. One at the top to hang it from and a small thin one at the bottom to keep it straight, square and flat. I get the DH to rip a thin piece of wood (1/4 to maybe 3/8) then sand it smooth and slip it in . The edges never move or curl .... just a thought.
On a side note, when I do a larger wall hanging now a days or one that will have some weight to it, I do two sleeves. One at the top to hang it from and a small thin one at the bottom to keep it straight, square and flat. I get the DH to rip a thin piece of wood (1/4 to maybe 3/8) then sand it smooth and slip it in . The edges never move or curl .... just a thought.
10-13-2019, 02:24 AM
#14
Super Member
Join Date: Aug 2009
Location: Illinois
Posts: 1,809
I'd probably opt for cotton or even a poly blend for backing. Poly won't be as heavy and you've already got weight with the satin. Instead of putting that amount of satin from the dress on the back where it won't be seen, I'd tuck the rest of that dress away for other projects--perhaps a christening dress for later? Perhaps Christmas stockings?--something of sentimental significance.
10-13-2019, 07:17 PM
#15
Super Member
Join Date: May 2012
Location: Central Wisconsin
Posts: 4,391
On a side note, when I do a larger wall hanging now a days or one that will have some weight to it, I do two sleeves. One at the top to hang it from and a small thin one at the bottom to keep it straight, square and flat. I get the DH to rip a thin piece of wood (1/4 to maybe 3/8) then sand it smooth and slip it in . The edges never move or curl .... just a thought.
10-16-2019, 04:06 AM
#16
Super Member
Join Date: Aug 2018
Location: Greater Peoria, IL -- just moved!
Posts: 6,126
For batik backing, I rather like this one:
https://www.equilter.com/product/252...le-batik-white
I found the piece I was thinking of, the blues are definitely period and are soft and more to the grey or purple than the cobalt or bright. Don't know how to send pictures in a PM so here it is!
https://www.equilter.com/product/252...le-batik-white
I found the piece I was thinking of, the blues are definitely period and are soft and more to the grey or purple than the cobalt or bright. Don't know how to send pictures in a PM so here it is!
10-16-2019, 04:47 AM
#17
Super Member
Join Date: Oct 2015
Location: Va.
Posts: 5,753
If you are quilting on a frame set up, where you move the machine, then the below info doesn’t apply.
If You are quilting on a domestic or sit down- (moving the quilt, not the machine) then I would suggest being very diligent about basting if you use the satin for the back. I’ve found that satin tends to slide around a fair amount, even with spray basting. You can see this happening on the top and work to keep it aligned and wrinkle/pleat free but since you don’t see the back it’s easy to get a tuck or pleat. When I’m working with a fabric that is likely to slide a lot I like to spray baste, let sit overnight to set up and then pin baste as well, being careful to check both top and bottom after basting to make sure all is well before I start quilting.
it might also be easier to control the backing satin if you use a layer of thin cotton batting with a scrim under the wool batting. Wool batting is a dream to work with, but it is fluffier and more flexible than cotton batting which gives the fabric more opportunity to develop wrinkles while you’re working with it. Spray basting the backing to the cotton batting and letting it set up overnight would help to keep the fabric from slipping and getting wrinkles.
if you do use a double batt, I have had good luck spray basting the back to the cotton batting, then spray basting the wool batting to the cotton and then spray basting the top fabric to the wool using 505.
Hope you post pics of the quilt when you’re done it sounds lovely!
Rob
If You are quilting on a domestic or sit down- (moving the quilt, not the machine) then I would suggest being very diligent about basting if you use the satin for the back. I’ve found that satin tends to slide around a fair amount, even with spray basting. You can see this happening on the top and work to keep it aligned and wrinkle/pleat free but since you don’t see the back it’s easy to get a tuck or pleat. When I’m working with a fabric that is likely to slide a lot I like to spray baste, let sit overnight to set up and then pin baste as well, being careful to check both top and bottom after basting to make sure all is well before I start quilting.
it might also be easier to control the backing satin if you use a layer of thin cotton batting with a scrim under the wool batting. Wool batting is a dream to work with, but it is fluffier and more flexible than cotton batting which gives the fabric more opportunity to develop wrinkles while you’re working with it. Spray basting the backing to the cotton batting and letting it set up overnight would help to keep the fabric from slipping and getting wrinkles.
if you do use a double batt, I have had good luck spray basting the back to the cotton batting, then spray basting the wool batting to the cotton and then spray basting the top fabric to the wool using 505.
Hope you post pics of the quilt when you’re done it sounds lovely!
Rob
Thread
Thread Starter
Forum
Replies
Last Post
