Bradley Ultra Quilter?
05-31-2019, 11:07 AM
#21
Super Member
Join Date: May 2011
Location: Pacific NW
Posts: 9,443
I just received a frame and Juki. My thread and needle keep breaking. I took the machine in and after spending nearly $300 to tune the machine it still has the same problem. The repair man is no help. He says it is the quilting set up, not the machine. Tried to contact Bradley but they are gone, gone gone. I feel like I am stuck with this setup that does not work
If both your needle and thread are breaking, either your machine is out of time or you're moving the machine too fast. Since you just had it serviced, I suspect it's the second. Does the machine sew without any breakage when it's not on the frame?
06-01-2019, 05:09 AM
#23
Super Member
Join Date: Mar 2016
Posts: 2,834
Peckish is probably right. Start a new thread.
I don't own a longarm, but if I were in your situation, I would look for support groups. I also don't facebook, but their are some groups there that might be of help. Their might be Yahoo groups. There might be someone on this site who knows something. Try a new post, as well.
I don't own a longarm, but if I were in your situation, I would look for support groups. I also don't facebook, but their are some groups there that might be of help. Their might be Yahoo groups. There might be someone on this site who knows something. Try a new post, as well.
Thread
Thread Starter
Forum
Replies
Last Post
