FMQ!!! What am I doing wrong?????
#71
Check your bobbin to make sure it isn't overly full. I've had that issue and re-threaded both top and bobbin, changed needle, adjusted tension, when I switched to a bobbin that wasn't "full" it worked just fine. I only have had this problem with FMQ. It's worth a shot.
Marie M.
Marie M.
#72
Super Member
Join Date: Jan 2010
Location: Some where in way out West Texas
Posts: 3,041
Originally Posted by sentimentaljourney2974
Did you magnitize your bobbin area with metal bobbins when it was new?
#73
Change the needle, rethread it, take the bobbin out and replace it, pull the bobbin thread to the top before you start and you should be good to go. OH, and check to make sure someone little didn't move your tention dial while you were out of the room.
#74
Member
Join Date: Sep 2010
Location: SoCal
Posts: 55
Manufacturers strongly suggest to 'activate/magnetize your bobbin case' and never use plastic bobbins. Use metal bobbins only. If this is not done there will be bobbin issues eventually. My sewing machine repair person taught me this. Of course he may have cheated himself out of repair charges. One of my manuals states this as well. I learned this when plastic bobbins first came out and we were deciding which to use (metal or plastic). I know a metallurgist (metal engineer) and he said it makes perfect sense.
#75
Super Member
Join Date: Jan 2010
Location: Some where in way out West Texas
Posts: 3,041
Originally Posted by sentimentaljourney2974
Manufacturers strongly suggest to 'activate/magnetize your bobbin case' and never use plastic bobbins. Use metal bobbins only. If this is not done there will be bobbin issues eventually. My sewing machine repair person taught me this. Of course he may have cheated himself out of repair charges. One of my manuals states this as well. I learned this when plastic bobbins first came out and we were deciding which to use (metal or plastic). I know a metallurgist (metal engineer) and he said it makes perfect sense.
#78
Member
Join Date: Sep 2010
Location: SoCal
Posts: 55
I've also wanted to say on this website...First, I am old school. My grandmother taught me to quilt. I cannot imagine what she would think about 'computerized machines' or 'quilting machines' that make your quilt all stiff and over threaded. I know how I feel. Some quilts I see are for show only. What happened to 'quilting' the way women used to quilt, out of necessity for your family, comfortable yet nice to look at too?
#80
Power Poster
Join Date: Jun 2010
Location: Alabama
Posts: 15,368
It definitely looks like a tension problem to me. I just don't want to get used to the computerized machines. Just give me my old featherweight or my treadle. The stitch is so straight and even. I have an old Singer 128 portable that was in storage for over 25 years. It is 80 years old. We cleaned it up, oiled it, I sat down to sew with it and it put out the prettiest stitch without any problems. Just call me an old timer.
Thread
Thread Starter
Forum
Replies
Last Post