Mrs. SewNSew

I like using metal bobbins. The plastic ones bug me the way I can hear them moving. It's like nails on chalkboard. I've noticed inconsistencies in the metal bobbins though and I've read on Sew Classic where she mentions the same and recommends her plastic bobbins for the Singer 15's.

What exactly IS the inconsistancy? The one part I Have noticed, is that the little slot where they fit on the bobbin winder..some aren't cut deep enough and the bobbin doesn't sit all the way over like it should.

Has anyone else noticed anything? What do you use in your vintage machines that take class 15 bobbins?

Cari-in-Oly

The clamoring about bad bobbins started about 5 years ago. The distributors got a big batch of bad bobbins and sent them out to all the suppliers without knowing they were bad. Luckily, people like Cindy Peters and Jenny at Sew Classic caught it very early and started testing all the metal bobbins before selling them. Guess where all those bobbins ended up being sold? At JoAnns, Walmart, and anywhere else you buy the carded bobbins. Quality improved for a few years but evidently there just aren't good ones being made any more, that's why Sew Classic won't sell them. It's not just the notch, the center of the hub can be too high or very rough, and lots of them are so out of round they're unusable. I could just kick myself now for all the old bobbins I used to throw away because I could buy new ones.

Cari

quiltedsunshine

I've noticed, too. Brewer carries 2 different quality 15 class bobbins, and I just ordered the more expensive ones (we're talking pennies difference in price). We've been carrying the cheapest for a few years, and I just don't like them. I'll let you know if I see any difference. You could always go with the generic Bernina bobbins, which are definitely a better quality bobbin. They sew well with other machines, but they don't usually fit the bobbin winder (post hole is a little tighter).

Mrs. SewNSew

The problem I have is that I have various bobbins on hand that have come in with machines or buys I have made and I am not sure what is usable and what is not.

Do you have a good method for sorting them out?

quiltingcandy

Cari, I totally understand what you are saying. I threw away a lot also. My 1973 Singer used plastic bobbins but I had gotten some metal bobbins since I had so many problems with that machine. So they were old and didn't think I needed that many bobbins any more. My sister tried to talk me into the pre-filled bobbins - those were a total waste of money. The thread wasn't even good enough to use for basting. Then I bought some new bobbins. The plastic bobbins for my Singer machines felt cheap and when I bought the metal ones some didn't even fit the machine, even though they were in the same package. Luckily, my mom still had quite a few bobbins when she gave me the 15-91.

My Janome and Viking only use plastic bobbins - but they are from the dealer, so if they do fail, they know I am brining them right back. So far, now problem.

Mrs. SewNSew

I would appreciate it if you'd let me know how you like them. Thank you.

Cari-in-Oly

Sort of. If they're old and have thread on them, then I figure they must be good because they've been used. I haven't run into an old bobbin yet that's bad, only new ones. Luckily I bought a bunch of good new ones a few years ago when Jenny was still testing hers, plus with all the old ones I've gotten with machines and fiddly bits I've bought I should be set for life as long as I don't give away a handful like I used to with each machine I flip.

Cari

Rodney

It's not just the 15 bobbins that are bad. Singer branded class 66 bobbins sold at Walmart are garbage too. They're visibly narrower at the rim than vintage class 66 bobbins and they tend to be inconsistent too. Quality control is nearly non-existent on them I think. I haven't had to buy any new class 15 bobbins yet so can't say whether I've had any problems with those ones.
I hold onto my vintage bobbins. Usually a visual inspection for rough spots or bent ones is all it takes.
Rodney

miriam

sew-classic recommends just the class 15 plastic bobbins these days because of the holes
I bought some metal class 15 from WM or somewhere and they were very light weight and flimsy.
I've had a few bobbins fall apart - use them to make crafts - earrings anybody?
When I find old bobbins, I remove the thread and if they are rusty I soak them in something to remove the rust then I brush them up and they are ok again most of the time - if not ok they get thrown away. I have seen a few old bent bobbins that really don't work and should be thrown away.

Macybaby

We looked through our new ones - and they were not even distance all the way around between the two sides. It was easy to see. Caused problems with winding, don't know about sewing as we tossed them.