Look what I got! A 301A! and is anything missing from this picture???
#1
Senior Member
Thread Starter
Join Date: Jul 2017
Posts: 809
Look what I got! A 301A! and is anything missing from this picture???
Yesterday was the 1/2 off day at Goodwill, which includes the furniture only store right around the corner from my house,where they sell sewing machines in cabinets!!! I got a 301A in its cool little table that it clicks into, and a dual table that holds a serger on one side and a machine on the other for $19.50. (Insert heavenly music chord here.)
So, the big question is- is there anything missing from the bobbin area? Besides a bobbin. What kind do these babies use, anyway?
[ATTACH=CONFIG]584330[/ATTACH]
And here's a picture of the whole thing.
[ATTACH=CONFIG]584331[/ATTACH]
And this is the way it attaches to the cabinet, for those who have never seen it before. It lays in the tray and the clip (yellow arrow) holds it in, and you just press to release.
[ATTACH=CONFIG]584332[/ATTACH]
[ATTACH=CONFIG]584327[/ATTACH]
So, the big question is- is there anything missing from the bobbin area? Besides a bobbin. What kind do these babies use, anyway?
[ATTACH=CONFIG]584330[/ATTACH]
And here's a picture of the whole thing.
[ATTACH=CONFIG]584331[/ATTACH]
And this is the way it attaches to the cabinet, for those who have never seen it before. It lays in the tray and the clip (yellow arrow) holds it in, and you just press to release.
[ATTACH=CONFIG]584332[/ATTACH]
[ATTACH=CONFIG]584327[/ATTACH]
Last edited by themadpatter; 11-25-2017 at 04:35 PM. Reason: Pictures were wacky
#5
I love my 301A! You got yours for a steal!
The bobbins should be either Singer #45785 or #A1225 (the website says they are alternate part numbers).
Looking at the photo, you have the bobbin case, and I don't see anything missing, so you should be good to go
Looking up the part number reminds me that I needed to find a new walking foot, since a piece of mine broke recently (still usable, but the plastic is a little brittle, so I should replace it before I need it!)
The bobbins should be either Singer #45785 or #A1225 (the website says they are alternate part numbers).
Looking at the photo, you have the bobbin case, and I don't see anything missing, so you should be good to go
Looking up the part number reminds me that I needed to find a new walking foot, since a piece of mine broke recently (still usable, but the plastic is a little brittle, so I should replace it before I need it!)
#6
Congratulations on a great machine! You must be so happy and it looks to be in fine condition. I have bought bobbins from Nova Montgomery's Featherweight website as it is the same bobbin as the Featherweight. https://www.novamontgomery.com/
#7
Super Member
Join Date: Jan 2015
Posts: 2,867
What a bargain!
https://singer-featherweight.com/search?q=301+bobbins
I bought my bobbins, FMQ foot and replacement bobbin winder tire from Aprils1930sshoppe which is now The Featherweight Shop. If you like a lot of bobbins, I'd purchase the ten pack of repros and a three pack of original ones. My machine seems to like originals for FMQ and reproduction ones for anything else.
https://singer-featherweight.com/search?q=301+bobbins
I bought my bobbins, FMQ foot and replacement bobbin winder tire from Aprils1930sshoppe which is now The Featherweight Shop. If you like a lot of bobbins, I'd purchase the ten pack of repros and a three pack of original ones. My machine seems to like originals for FMQ and reproduction ones for anything else.
#9
OH- The Featherweight Shop is a great website. Loads of info and very nice people to do business with.
Thread
Thread Starter
Forum
Replies
Last Post
greywuuf
For Vintage & Antique Machine Enthusiasts
27
07-29-2012 02:17 PM
stitchofclass2
General Chit-Chat (non-quilting talk)
13
11-18-2010 01:28 PM