Go Back  Quiltingboard Forums >
  • Main
  • Using color catchers >
  • Using color catchers

  • Using color catchers

    Thread Tools
     
    Old 10-15-2019, 06:11 PM
      #1  
    Super Member
    Thread Starter
     
    marilynr's Avatar
     
    Join Date: Sep 2010
    Location: Oregon
    Posts: 1,604
    Default Using color catchers

    When using a color catcher on flannel before using, do I use it until a color catcher comes out clean, & then I know it will no longer bleed when quilting with it?
    marilynr is offline  
    Old 10-15-2019, 08:22 PM
      #2  
    Super Member
     
    sewingsuz's Avatar
     
    Join Date: Nov 2010
    Location: Arizona
    Posts: 7,850
    Default

    I always just use it once and nothing bleeds again.
    sewingsuz is offline  
    Old 10-15-2019, 10:15 PM
      #3  
    Super Member
     
    Join Date: Dec 2010
    Location: Chula Vista CA
    Posts: 7,401
    Default

    I use color catchers when I wash my fabric the first time. If the color in the catcher is very dark, I will wash the fabric a second time and if it still is extremely dark, I may not use it. Depending on the fabric if is looks like the color is washing out, I won't use it. (I had that once with some home-dyed fabric I bought at a quilt show. And another time with some blue flannel fabric and it looked so distorted I should have taken it back to the store.) Otherwise, I am not concerned about it. When the quilt is finished, I wash it with a color catcher and usually give a few color catchers with the quilt with instructions to wash it in cold water and use the catcher the first couple washes.
    quiltingcandy is offline  
    Old 10-16-2019, 03:19 AM
      #4  
    Super Member
     
    Battle Axe's Avatar
     
    Join Date: Apr 2010
    Location: Northeastern Indiana
    Posts: 2,800
    Default

    When I had the rug business and dyed all my own fabric, there were times that I ran color catchers a second time. Some of the very dark blue greens were troublesome. I would wash it again and add new color catchers, I'd use several on 30 yards of fabric. They would come out slightly tinted but I never had a problem past that.
    Battle Axe is offline  
    Old 10-16-2019, 03:42 AM
      #5  
    Super Member
     
    citruscountyquilter's Avatar
     
    Join Date: Mar 2013
    Location: Hernando FL
    Posts: 1,662
    Default

    In my experience color catchers will never come out "clean". They will always have some color or gray to them after using them. This doesn't mean however that your fabric will continue to bleed into other fabrics. At most I've only washed something twice. Usually once and I consider it good even though the color catcher has a lot of color to it. I've never had anything bleed in a quilt doing that.
    citruscountyquilter is offline  
    Old 10-16-2019, 04:15 AM
      #6  
    Super Member
     
    Join Date: Aug 2018
    Location: Greater Peoria, IL -- just moved!
    Posts: 6,165
    Default

    I also do the "look and see" method of prewashing. If the color catcher is really dark I will wash again, or double check the piece I'm suspicious about. You can rub damp cloth into a white paper towel for example and see if more dye is being cast off.

    I've only had problems once and it ruined a quilt, the maroon dye was not set properly. I had a sophisticated maroon, silver/grey and blue color scheme with sparkles of white. I prewashed the fabrics and didn't think about it but I always wash quilts before giving them away. To my horror not only were the squares of white now baby pink but a few pieces of a poly blend white had snuck into the top and they stayed bright white.

    Here's a picture of the offending fabric. They both started out the same shade of maroon. The darker one has been washed at least twice (once by me), I found it at a thrift shop. The "orange" piece was the same color and is the same fabric as ruined the quilt. The dark one I used in my original quilt in the blue colorway -- which was colorfast and had no problems. The lighter one has been washed at least 6 times now and still runs like a sprinter!
    Attached Thumbnails bad-fabric.jpg  
    Iceblossom is offline  
    Old 10-16-2019, 05:48 AM
      #7  
    Power Poster
     
    Join Date: Jan 2011
    Location: Southern USA
    Posts: 16,393
    Default

    I use a color catcher in every color or mixed load of my everyday laundry. I've never had one to be white after use. The catchers stop the dingy look. I haven't had but a couple of quilt fabrics bleed over the years and that was my fault for not testing it first. I test the darker colors by steam pressing a sample on a piece of white muslin before cutting. If color shows on the white then I don't use it. I don't waste water, power, products and my time trying to save it.
    Onebyone is offline  
    Old 10-16-2019, 06:07 AM
      #8  
    Member
     
    Join Date: Jun 2016
    Posts: 29
    Default

    I always sew a strip of the new dark fabric to the lightest color or white fabric and wash it with a load of laundry and a color catcher to see if it bleeds. When I wash a quilt I usually put between 3-5 color catchers in washer.
    MakaySews is offline  
    Old 10-16-2019, 07:25 AM
      #9  
    Power Poster
     
    Join Date: May 2008
    Location: MN
    Posts: 24,645
    Default

    I soak my fabrics (like colors together) first to see if there is any dye release -

    after I am satisfied that the fabrics have "good manners" - as in not releasing any more dye to color the water -

    I want to be "comfortable" with putting a red, a white, a pastel, and a navy blue or black fabric - all in the same wash without fretting about what color the white or pastel color will be when taken out of the wash.

    then they get gently washed and dried and added to my stash.

    My things go to people that may - or may not - have "good sense" when it comes to washing the items - so I want them to "survive" ordinary washing techniques with no worry on the part of the washer.

    Even with the precautions I usually take, it is always a good idea to dry the item as soon as it has been washed. Wadded wet fabric will sometimes transfer color. (Ask me how I know this!)

    Last edited by bearisgray; 10-16-2019 at 07:28 AM.
    bearisgray is offline  
    Old 10-16-2019, 09:13 AM
      #10  
    Power Poster
     
    Join Date: Jan 2011
    Location: Southern USA
    Posts: 16,393
    Default

    My things go to people that may - or may not - have "good sense" when it comes to washing the items
    LOL Reminds me of my youngest DD who's quilt I made for her was almost falling apart. She was washing it once a week with her sheets using bleach. This same child ruined a very expensive wood cutting block by washing it in the dishwasher after every use. I never thought she didn't know not to do this. Being the youngest everything was always done by older sister or me.
    Onebyone is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    Mamagus
    General Chit-Chat (non-quilting talk)
    17
    08-08-2011 11:55 AM
    nycbgirl
    Main
    9
    02-09-2011 08:55 AM
    grma33
    Main
    9
    01-02-2011 08:16 PM
    Quilting Di
    Main
    17
    10-17-2010 05:25 PM
    pittsburgpam
    Pictures
    35
    06-26-2010 07:56 AM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter