Older model Gammill
#1
Member
Thread Starter
Join Date: Oct 2019
Posts: 2
Older model Gammill
I have an opportunity to buy an older model (97 or 98) Gammill Classic 26 for $4000. It does not have a stitch regulator, and computerized programs cannot be added to it. I’m very new to quilting. I would appreciate advice from those of you with more experience. Space is not a problem. Thank you!
#2
Junior Member
Join Date: Mar 2014
Location: south Mississippi
Posts: 228
I have an opportunity to buy an older model (97 or 98) Gammill Classic 26 for $4000. It does not have a stitch regulator, and computerized programs cannot be added to it. I’m very new to quilting. I would appreciate advice from those of you with more experience. Space is not a problem. Thank you!
If you don't take it, please private message me the contact info for whoever is selling it. It definitely sounds like a deal to me.
#3
Super Member
Join Date: Aug 2011
Location: kansas
Posts: 6,407
I have a 2006 Classic Plus that I bought 6 years ago. It has a 14' frame. I paid little over double that for the machine, all the pantos, 3 footlockers of thread, rulers, stencils, replacement parts (over 100 bobbins and 5 bobbin cases), all her books on LA quilting, a roll of bat. If all you are getting is the machine and frame, then I think that price is a bit high. If you are getting all supplies, etc in addition, then it's not bad.
Not having a stitch regulator would be a no sale for me.
Also, have you ever tried out or taken lessons on a long arm? It is a very different process and sometimes people don't like it. (although I love it!)
Not having a stitch regulator would be a no sale for me.
Also, have you ever tried out or taken lessons on a long arm? It is a very different process and sometimes people don't like it. (although I love it!)
#4
Senior Member
Join Date: Sep 2012
Location: Washington
Posts: 855
Ramblings....
I have an old 30 inch all mechanical Gammill, a PDQ-30 named Quiltosaurus, older than the one you're considering. It's not as easy to quilt with as one with a slow speed and a stitch regulator, but I still enjoy the process. I don't know if $4000 is a good buy for the Classic or not considering that I paid $3000 in 1998 for mine, LOL. But these machines are built to outlast we humans, with very generic sewing parts and motors that can be replaced with parts from Zoro Tool, so it may make sense that their price point can stabilize at $3-4000. An all-mechanical or mostly-mechanical Gammill will certainly get the job done. Whether or not it's worth $4000 to you, even if it may be worth $4000 in general is the question. If possible, I'd see if you can go work with it some and if it's something you can enjoy. At that price point, you may be able to find something you like better that is a little newer. Just a thought.
Nolting (which made my Gammill and may have made the Classic too) has used Gammills in stock from time to time and may at times be a place to check for price points. https://www.nolting.com/history.php. Also Longarm University has a classified page that lists people's offering prices. Most of the Classics listed on Longarm University have Statler Stitchers which makes them pricey, but judging by the asking prices for the basic ones, your deal might be very good. Of course, offering a price doesn't mean someone will pay that price....anyway https://longarmuniversity.com/MachinesForSale.html#M4S.
I absolutely hated Quiltosaurus when I first got her, tried her for awhile and then let her sit . This was before the internet had great resources for asking questions or understanding things like tension. One day I oiled her up, loaded up the quilt and brought a level of patience with me that I hadn't brought before and she and I got along fabulously. Her stitches are gorgeous and I pretty much can use any thread as long as I have the right needles, etc etc. She doesn't have a ruler foot and no stitch regulator, but I can finish quilts, and that is amazing. And she me to come with patience and my success or failure with her depends on my mood, something that is also amazing, really. She makes me calm down because I have to or I won't have good success with her, so she's sort of therapeutic. I'm so happy I have her and wouldn't part with her. We're bonded ;-). But would I buy her now if I had the chance at other machines with newer tech? Um, (don't tell her, but) chances are I wouldn't unless it was a screaming deal (meaning less than $3000) and I had more space for her than I do now.
Anyway there's my input
Another point, if the Gammill is the mostly mechanical version that I think you're talking about, any tech who knows industrial machines at all could look at it. Those machines are very basic, like a giant featherweight, really. You just need to take it off the table, something that isn't hard at all with the assistance of a friend so you can take it in.
I have an old 30 inch all mechanical Gammill, a PDQ-30 named Quiltosaurus, older than the one you're considering. It's not as easy to quilt with as one with a slow speed and a stitch regulator, but I still enjoy the process. I don't know if $4000 is a good buy for the Classic or not considering that I paid $3000 in 1998 for mine, LOL. But these machines are built to outlast we humans, with very generic sewing parts and motors that can be replaced with parts from Zoro Tool, so it may make sense that their price point can stabilize at $3-4000. An all-mechanical or mostly-mechanical Gammill will certainly get the job done. Whether or not it's worth $4000 to you, even if it may be worth $4000 in general is the question. If possible, I'd see if you can go work with it some and if it's something you can enjoy. At that price point, you may be able to find something you like better that is a little newer. Just a thought.
Nolting (which made my Gammill and may have made the Classic too) has used Gammills in stock from time to time and may at times be a place to check for price points. https://www.nolting.com/history.php. Also Longarm University has a classified page that lists people's offering prices. Most of the Classics listed on Longarm University have Statler Stitchers which makes them pricey, but judging by the asking prices for the basic ones, your deal might be very good. Of course, offering a price doesn't mean someone will pay that price....anyway https://longarmuniversity.com/MachinesForSale.html#M4S.
I absolutely hated Quiltosaurus when I first got her, tried her for awhile and then let her sit . This was before the internet had great resources for asking questions or understanding things like tension. One day I oiled her up, loaded up the quilt and brought a level of patience with me that I hadn't brought before and she and I got along fabulously. Her stitches are gorgeous and I pretty much can use any thread as long as I have the right needles, etc etc. She doesn't have a ruler foot and no stitch regulator, but I can finish quilts, and that is amazing. And she me to come with patience and my success or failure with her depends on my mood, something that is also amazing, really. She makes me calm down because I have to or I won't have good success with her, so she's sort of therapeutic. I'm so happy I have her and wouldn't part with her. We're bonded ;-). But would I buy her now if I had the chance at other machines with newer tech? Um, (don't tell her, but) chances are I wouldn't unless it was a screaming deal (meaning less than $3000) and I had more space for her than I do now.
Anyway there's my input
Another point, if the Gammill is the mostly mechanical version that I think you're talking about, any tech who knows industrial machines at all could look at it. Those machines are very basic, like a giant featherweight, really. You just need to take it off the table, something that isn't hard at all with the assistance of a friend so you can take it in.
Last edited by QuiltnNan; 11-09-2019 at 04:28 AM. Reason: shouting/all caps
#5
Super Member
Join Date: Jan 2012
Posts: 4,783
If you get the serial number of the machine from the seller, call Gammill because with that number they can give you the history of the machine (identity of all previous owners) and tell you the fair market value of that particular machine.
#7
Not having a stitch regulator would be a no sale for me. Yes, this!
I think $4000 is a lot. I would consider a newer, as in younger but still used, machine with a smaller throat opening (22 inches) but with a stitch regulator. Is it possible to wait and save up so you can get a better machine? It might be hard to sell this machine again when you are ready to up grade. I waited and bought the machine that I really wanted.
I think $4000 is a lot. I would consider a newer, as in younger but still used, machine with a smaller throat opening (22 inches) but with a stitch regulator. Is it possible to wait and save up so you can get a better machine? It might be hard to sell this machine again when you are ready to up grade. I waited and bought the machine that I really wanted.
#9
Senior Member
Join Date: Jul 2010
Location: Lubbock, TX
Posts: 376
I’m a Gammill Statler owner and love mine to pieces. Ordinarily, I can’t recommend these machines highly enough. However, without the ability to upgrade it (contact Gammill to confirm this is accurate information) I think I’d continue looking for a newer model.
Thread
Thread Starter
Forum
Replies
Last Post