Knee lift for pressure foot
#1
Junior Member
Thread Starter
Join Date: Dec 2014
Posts: 157
Knee lift for pressure foot
I have been quilting for 25 plus years , and never thought I would need or like a knee lift. I have changed my mine, but I need your knowledge. Can I buy this and attach it to the machine I already own? I have a Singer.
i have looked at a couple YouTube videos, and I find it a little confusing.
i have looked at a couple YouTube videos, and I find it a little confusing.
#3
Super Member
Join Date: Aug 2018
Location: Greater Peoria, IL -- just moved!
Posts: 6,168
I've used vintage machines for most of the last 30 years, but a year ago my friend gave me a modern Bernina, I used it hard for the last year and now it has an issue and needs a trip to the shop so I've switched to my back-up/class machine.
How I miss my knee lift! And my friend who gave me the machine never used it.
The other thing is the bobbin sensor. It never was that big a deal before, but now that I'm used to the sensor I run out of bobbin thread all the time, usually I don't figure it out until at least a foot or two of sewing has gone on that didn't go on...
How I miss my knee lift! And my friend who gave me the machine never used it.
The other thing is the bobbin sensor. It never was that big a deal before, but now that I'm used to the sensor I run out of bobbin thread all the time, usually I don't figure it out until at least a foot or two of sewing has gone on that didn't go on...
#4
I've used vintage machines for most of the last 30 years, but a year ago my friend gave me a modern Bernina, I used it hard for the last year and now it has an issue and needs a trip to the shop so I've switched to my back-up/class machine.
How I miss my knee lift! And my friend who gave me the machine never used it.
The other thing is the bobbin sensor. It never was that big a deal before, but now that I'm used to the sensor I run out of bobbin thread all the time, usually I don't figure it out until at least a foot or two of sewing has gone on that didn't go on...
How I miss my knee lift! And my friend who gave me the machine never used it.
The other thing is the bobbin sensor. It never was that big a deal before, but now that I'm used to the sensor I run out of bobbin thread all the time, usually I don't figure it out until at least a foot or two of sewing has gone on that didn't go on...
#5
On vintage/mechanical machines, sometimes you can rig something that will mechanically raise and lower the foot lift bar, but it takes quite a bit of fabrication to do so (a lot of older commercial machines have the mechanism on the outside of the machines that does just that).
Most modern / electronic machines it would need to be part of the machine to start with.
I love having a knee lift for the foot - it's so nice to have both hands free to get the fabric in just the right spot while lowering the foot in place.
Most modern / electronic machines it would need to be part of the machine to start with.
I love having a knee lift for the foot - it's so nice to have both hands free to get the fabric in just the right spot while lowering the foot in place.
#7
Member
Join Date: Aug 2019
Location: The beautiful San Gabriel foothills, So. Cal
Posts: 71
I have been quilting for 25 plus years , and never thought I would need or like a knee lift. I have changed my mine, but I need your knowledge. Can I buy this and attach it to the machine I already own? I have a Singer.
i have looked at a couple YouTube videos, and I find it a little confusing.
i have looked at a couple YouTube videos, and I find it a little confusing.
As an aside, I may be the only long time Bernina user who doesn't use her knee lift. I've never liked it. I was piecing on my Viking Designer II because I love the auto foot lift, then fmq on my Berninas. I was so happy when they included an auto foot lift on their machines.
#8
Junior Member
Thread Starter
Join Date: Dec 2014
Posts: 157
Ditto on sewing without bobbin thread. I didn’t know they made a sensor for that. I think I need to save my money and upgrade my machine. I have a very basic Singer that is at least 25 years old. It has been a good one. I keep it clean and oiled and it has only been in the shop once.
#9
Junior Member
Join Date: Jul 2019
Posts: 165
Love my knee lift. I agree it would have to be a feature that is already a part of your machine. Check your users manual and it should say if that is an available option. You could also google the question on the internet. “Is knee lift available for Singer ___ (type in model #)
#10
Senior Member
Join Date: Nov 2012
Posts: 903
There will be a hole in the right bottom corner of your machine if it has the lift mechanism. I am very dependent on a knee lift and have passed on machines without it. As for the bobbin sensor, I appreciate having it, but I can hear it when I run out of thread on my Juki, so I never get too far sewing nothing.