Slant Needle buttonholers plates
07-29-2020, 05:43 AM
#1
Super Member
Thread Starter
Join Date: Mar 2016
Posts: 2,823
Slant Needle buttonholers plates
I have three different buttonholers for slant needle machines. Not every one has part numbers on the BH, itself or on the plates. Apparently, they all take different plates for different machines. One is the burgundy box, with no instructions and a plate like the old green ones had. I also have a couple of "Professional Buttonholers", one for the 400, 500, and 600 machine, and one for the 700, 900 and 2000 machines. Plus I have the small letter monogrammer that has a plate in it that is mentioned on the 700, etc. buttonholers if you want to use it for the 400, etc. machines.
It seems like there was a thread on this subject a while back, but I can't find it. Does anyone understand the uses for these buttonholers and plates?
bkay
It seems like there was a thread on this subject a while back, but I can't find it. Does anyone understand the uses for these buttonholers and plates?
bkay
07-29-2020, 06:39 AM
#2
Senior Member
Join Date: Apr 2020
Location: South of St Louis
Posts: 822
This is a page from the manual for the "Professional Buttonholer". The entire buttonholer is part 381116. It says on the box that plate 381115 is used for 700 & 900 machines, plate 161825 for 400/500/600.
07-29-2020, 07:31 AM
#3
Super Member
Thread Starter
Join Date: Mar 2016
Posts: 2,823
Well, actually, I didn't ask the right question. I want to make some buttonholes on some masks and didn't know which one to use on the 401. Now I know. Andy Tube to the rescue, as usual. (This is assuming the parts are in the box they came in.)
The 301 uses the red boxed one:
The 400, 500 and 600 machines use the one with the sewing machine pictured on the box:
The 700, 900 and 2000 series use the one with multi-colored squares on the box.
( I tried to put the pictures under the description, but QB was having none of it.)
bkay
The 301 uses the red boxed one:
The 400, 500 and 600 machines use the one with the sewing machine pictured on the box:
The 700, 900 and 2000 series use the one with multi-colored squares on the box.
( I tried to put the pictures under the description, but QB was having none of it.)
bkay
07-29-2020, 10:24 AM
#7
Super Member
Thread Starter
Join Date: Mar 2016
Posts: 2,823
Descriptions and part numbers of the Singer slant needle buttonholers:
301/301a: This is in a burgundy "coffin" box that is plastic (like the old green singer buttonholer boxes). It should include 5 metal cams, a plate for the machine and two screws, one to attach the plate to the deck of the machine and one to attach the buttonholer to the presser shank. The buttonholer is black like the old machines. The part number 160743.
The one I have for the 400, 500 and 600 machines is in a cardboard box as shown above. It should include the buttonholer, which is metal, 10 plastic cams, the cover plate for the feed dogs and one screw to attach it to the presser shank. It has a partial photo of a 600 series machine on it. It just says, for "Slant needle machines" with no disclaimers. It has a label pasted on it that says. part no. 102577, the number under the label is 161829. I found a buttonholer on Etsy that uses the 161829 number that appears to be identical, so it appears that both are good parts numbers for this buttonholer. However, my buttonholer itself does not have a part number actually engraved on it. The plate is part number 161825, which is the same plate the 161829 part number contains. The copyright date on the manual is 1967.
The final one I have was an add on when I purchased my Touch and Sew, model 778. The buttonholer , itself has a hard plastic case , and is marked "Gt. Britain" on the bottom, but it has no part number on it. It has 10 plastic cams, the attaching plate (which has no part number on it) and the screw that attaches it to the presser shank. There is no part number on the buttonholer, itself, but is stamped GT. BRITAIN. The box has two numbers "SIMS 4642" and 381116 for the buttonholer. It says on the box that the "plate 383013 furnished is for the use on 700, 900 and 2000 series machines...For 401, 500, 600, 620 and 640 machines use part 161825" (which is the part number on the plate in the 400, etc. box.) The manual's copyright is 1973.
I do not have the "pink Jetson"one, which is a slant machine buttonholer, so I don't know what it fits.
bkay
301/301a: This is in a burgundy "coffin" box that is plastic (like the old green singer buttonholer boxes). It should include 5 metal cams, a plate for the machine and two screws, one to attach the plate to the deck of the machine and one to attach the buttonholer to the presser shank. The buttonholer is black like the old machines. The part number 160743.
The one I have for the 400, 500 and 600 machines is in a cardboard box as shown above. It should include the buttonholer, which is metal, 10 plastic cams, the cover plate for the feed dogs and one screw to attach it to the presser shank. It has a partial photo of a 600 series machine on it. It just says, for "Slant needle machines" with no disclaimers. It has a label pasted on it that says. part no. 102577, the number under the label is 161829. I found a buttonholer on Etsy that uses the 161829 number that appears to be identical, so it appears that both are good parts numbers for this buttonholer. However, my buttonholer itself does not have a part number actually engraved on it. The plate is part number 161825, which is the same plate the 161829 part number contains. The copyright date on the manual is 1967.
The final one I have was an add on when I purchased my Touch and Sew, model 778. The buttonholer , itself has a hard plastic case , and is marked "Gt. Britain" on the bottom, but it has no part number on it. It has 10 plastic cams, the attaching plate (which has no part number on it) and the screw that attaches it to the presser shank. There is no part number on the buttonholer, itself, but is stamped GT. BRITAIN. The box has two numbers "SIMS 4642" and 381116 for the buttonholer. It says on the box that the "plate 383013 furnished is for the use on 700, 900 and 2000 series machines...For 401, 500, 600, 620 and 640 machines use part 161825" (which is the part number on the plate in the 400, etc. box.) The manual's copyright is 1973.
I do not have the "pink Jetson"one, which is a slant machine buttonholer, so I don't know what it fits.
bkay
