Go Back  Quiltingboard Forums >
  • Main
  • For Vintage & Antique Machine Enthusiasts
  • Hoping for Davis Treddle Machine HELP! >
  • Hoping for Davis Treddle Machine HELP!

  • Hoping for Davis Treddle Machine HELP!

    Thread Tools
     
    Old 01-01-2021, 01:42 PM
      #1  
    Member
    Thread Starter
     
    Join Date: Jan 2021
    Location: Lancaster, PA
    Posts: 6
    Default Hoping for Davis Treddle Machine HELP!

    Hello all!

    I recently acquired a Davis treddle sewing machine "Manhatten." I have been desperately trying to find information on shuttle (the bobbin holder thing under the machine, not sure if thats the right term!) and bobbin lengths/sizes to be able to get the machine running again. If there is anyone with needle information as well I would be forever in your debt.

    Thanks for your time!
    msfasnac is offline  
    Old 01-01-2021, 02:12 PM
      #2  
    Member
    Thread Starter
     
    Join Date: Jan 2021
    Location: Lancaster, PA
    Posts: 6
    Default

    msfasnac is offline  
    Old 01-01-2021, 04:52 PM
      #3  
    Super Member
     
    leonf's Avatar
     
    Join Date: May 2016
    Location: near Topeka kansas
    Posts: 4,524
    Default

    Welcme aboard. Youi are correct on your terms. Do you have feed dogs on your machine. Some do not and it may make a difference.
    leonf is offline  
    Old 01-02-2021, 01:28 PM
      #4  
    Member
    Thread Starter
     
    Join Date: Jan 2021
    Location: Lancaster, PA
    Posts: 6
    Default

    Yes, it does have feet.
    msfasnac is offline  
    Old 01-02-2021, 01:30 PM
      #5  
    Member
    Thread Starter
     
    Join Date: Jan 2021
    Location: Lancaster, PA
    Posts: 6
    Default

    msfasnac is offline  
    Old 01-02-2021, 03:27 PM
      #6  
    Super Member
     
    OurWorkbench's Avatar
     
    Join Date: Mar 2015
    Location: Denver, CO
    Posts: 4,351
    Default

    Welcome, it looks like you have a Davis underfeed. I don't know where you might find a shuttle and bobbins for your machine. Hopefully, Jon will be along and able to tell you about the needle needed for your machine. Are there any numbers cast in the bottom of your machine? Also is there any letters other than the "Manhattan" on the head? I think the serial number may be on the front slide plate or possibly under the front slide plate. Those would probably help, although Jon can sometimes just look at the picture and tell.

    Janey - Neat people never make the exciting discoveries I do.
    OurWorkbench is offline  
    Old 01-02-2021, 04:02 PM
      #7  
    Member
    Thread Starter
     
    Join Date: Jan 2021
    Location: Lancaster, PA
    Posts: 6
    Default

    Number on the slide plate is 2617688. I didnt see any other numbers on the machine.
    msfasnac is offline  
    Old 01-02-2021, 04:08 PM
      #8  
    Member
    Thread Starter
     
    Join Date: Jan 2021
    Location: Lancaster, PA
    Posts: 6
    Default

    msfasnac is offline  
    Old 01-03-2021, 07:44 AM
      #9  
    Super Member
     
    Join Date: Aug 2011
    Location: Millville, NJ
    Posts: 1,835
    Default

    Hi,

    Manhattan is a Davis model N which is a 3/4 sized machine. The needles are called Davis long, Boye 10, 1x2 depending on who makes them. The 3/4 sized shuttle and bobbin are somewhat scarce. The full sized Davis shuttle is common and much easier to find. The needles are just shy of 2". The 3/4 shuttle is also a bit under 2". The bobbin is 1-1/4" long. I'd check the online auction sites and ask around various chat groups for parts.

    Jon
    jlhmnj is offline  

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is Off
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter