Go Back  Quiltingboard Forums >
  • Main
  • Using fabric that bled >
  • Using fabric that bled

  • Using fabric that bled

    Thread Tools
     
    Old 03-04-2022, 04:40 PM
      #1  
    Senior Member
    Thread Starter
     
    Join Date: Oct 2020
    Posts: 706
    Default Using fabric that bled

    I recently purchased a 1990’s vintage piece of red fabric. When I pre-washed it, it turned the color catchers a lovely shade of pink, and several of the other fabrics I pre-washed with it also came out pink. I was able to remove the pink from the other fabrics using Dawn. Using Dawn, I also was able to remove the excess dye from the red fabric and a subsequent washing of my red fabric culprit had the color catcher come up white.

    Should I use the red fabric now or further treat it (and, if so, with what)?

    Last edited by SuzSLO; 03-04-2022 at 04:43 PM.
    SuzSLO is offline  
    Old 03-04-2022, 06:02 PM
      #2  
    Super Member
     
    Join Date: Jun 2010
    Location: The Deep South near Cajun Country, USA
    Posts: 5,434
    Default

    I'll be watching this thread. I had a piece of red fabric that I couldn't stop the bleeding. It was pink when I put it away.
    Barb in Louisiana is offline  
    Old 03-04-2022, 09:22 PM
      #3  
    Super Member
     
    Join Date: Aug 2018
    Location: Greater Peoria, IL -- just moved!
    Posts: 6,165
    Default

    Once it comes clean, it is good to go without further treatment.

    I love basic Dawn detergent. Along with WD40 and duct tape, I think you can survive just about anything. I'm also a fan of heat treating running dyes -- thoroughly wet and soak, put in a safe for microwave pyrex type bowl, cover with plastic wrap and nuke it. Or you can boil on top of the stove.

    I had one really bad experience with a Maroon fabric that completely ruined a quilt. I had prewashed it without a color catcher and thought I was good to go. That piece never stopped bleeding.

    The darker fabric is a remnant of what ruined the quilt and has been washed at least twice. The other is from the same line/it started the same color -- I used the blue in the quilt with no problems and has been treated and washed at least 7 times and still runs like a thief in the night...
    Attached Thumbnails bad-fabric.jpg  
    Iceblossom is offline  
    Old 03-04-2022, 10:23 PM
      #4  
    Power Poster
     
    Join Date: Mar 2011
    Location: Ontario, Canada
    Posts: 41,538
    Default

    If I have a bleeder, I save it to be pieced with black fabric.
    Tartan is offline  
    Old 03-05-2022, 06:03 AM
      #5  
    Super Member
     
    Join Date: Jan 2014
    Location: Gaylord, MN
    Posts: 4,011
    Default

    Tartan - good idea.
    Karamarie is offline  
    Old 03-05-2022, 06:09 AM
      #6  
    Power Poster
     
    SusieQOH's Avatar
     
    Join Date: Jul 2017
    Location: Central Ohio
    Posts: 15,236
    Default

    Suz- if you really want to use it I would do a wash one more time. If it doesn't bleed I'd go ahead and use it.
    SusieQOH is offline  
    Old 03-05-2022, 07:29 AM
      #7  
    Power Poster
     
    Join Date: May 2008
    Location: MN
    Posts: 24,646
    Default

    There is a difference between excess dye in a piece - once that has been removed, the piece is "safe" to use.

    My criteria for that is: after soaking it in hot water with a bit if Dawn detergent for at least two hours, will it " rinse clear" -

    If a fabric is a bleeder, I will attempt to return it if it is recent purchase. Otherwise it goes in the wastebasket. I wi not use or donate a known bleeder. A bleeder never rinses clear.







    bearisgray is offline  
    Old 03-05-2022, 07:33 AM
      #8  
    Power Poster
     
    Join Date: May 2008
    Location: MN
    Posts: 24,646
    Default

    Vicki Welsh has an excellent article/blog about bleeding fabric . Unfortunately, I do not know how post a link from my phone. Maybe someone else will post a link?
    bearisgray is offline  
    Old 03-05-2022, 07:49 AM
      #9  
    Super Member
     
    EasyPeezy's Avatar
     
    Join Date: Mar 2010
    Location: Canada
    Posts: 3,460
    Default

    I would suggest you wash it with a piece of white fabric. Sometimes
    there's just a hint of dye that is not noticeable to the eye but it will
    catch in white fabric.
    EasyPeezy is offline  
    Old 03-05-2022, 10:56 AM
      #10  
    Super Member
     
    Join Date: May 2011
    Location: Pacific NW
    Posts: 9,557
    Default

    Test it. Get a white cotton kitchen towel damp, rub it on the red fabric for a good half-minute or minute. Get the red fabric nice and damp, give it every opportunity to bleed. If your white cotton kitchen towel stays white, you're good.
    Peckish is offline  

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter