Hi from Minnesota.
07-18-2022, 03:52 AM
#3
Junior Member
Join Date: Oct 2016
Posts: 161
Julie Greene, welcome to the Quiltboard from Kansas! When I read New Ulm, MN. I thought wow, I have an aunt and uncle who lived there for 40 years or better. I have no advice on your question either, but wanted to welcome you. Lena1952"s suggestion to google is good advice.
07-18-2022, 05:30 AM
#4
Power Poster
Join Date: Mar 2011
Location: Ontario, Canada
Posts: 41,460
Welcome from Ontario, Canada. I don’t have a Koala cabinet but if your machine is a bit low, I might try a couple of layers of rubberized shelf liner underneath the machine. If you need more height, cutting a foam child’s paddle board to fit under your machine might work.
07-19-2022, 03:11 AM
#5
Senior Member
Join Date: Nov 2011
Location: West Virginia
Posts: 686
I have another kind of cabinet and my machine was sitting low. I used 4 of the round bottoms on Aurifil threads under the 4 corners of my machine. This raised it to the right height needed. These are those round bottoms/stands on Aurifil thread that are removable.
07-19-2022, 03:25 AM
#6
Super Member
Join Date: Dec 2010
Location: Portage, Michigan
Posts: 7,364
Welcome to you from the mitten state. It looks like you have been given some good advise and options about adjusting you cabinet. Enjoy the your new sewing sewing experience and wander about the site just for the fun of it. Lots of good folks here overflowing with good ideas!
