Threading White VS III bobbin/shuttle
03-09-2023, 09:48 AM
#1
Member
Thread Starter
Join Date: Mar 2023
Posts: 3
Threading White VS III bobbin/shuttle
My father just gave me a White VS III and I cleaned and oiled it and believe it is working properly. When I try to thread the bobbin/shuttle the thread always breaks when I pull on the thread. Are there any videos showing the proper way to put the thread in the shuttle? Thank you
03-09-2023, 06:52 PM
#2
Super Member
Join Date: Mar 2015
Location: Denver, CO
Posts: 4,261
Welcome. I'm not familiar with your machine, in particular. I don't know if this would be what you need or not. https://www.youtube.com/watch?v=sNULAP4YoOc
The manual at http://www.needlebar.org/main/manual...evs/index.html isn't very good for instructions on threading the bobbin. There is a good article about a Singer long shuttles can be found down the page at https://w.treadleon.net/sewingmachin...vsshuttle.html It is possible the spring has rusted and/or has been screwed on too tight to allow thread to pass through it.
Good luck on getting it working properly.
Janey - Neat people never make the exciting discoveries I do.
Not affiliated with off-site link(s)
The manual at http://www.needlebar.org/main/manual...evs/index.html isn't very good for instructions on threading the bobbin. There is a good article about a Singer long shuttles can be found down the page at https://w.treadleon.net/sewingmachin...vsshuttle.html It is possible the spring has rusted and/or has been screwed on too tight to allow thread to pass through it.
Good luck on getting it working properly.
Janey - Neat people never make the exciting discoveries I do.
Not affiliated with off-site link(s)
03-10-2023, 05:23 AM
#3
Member
Thread Starter
Join Date: Mar 2023
Posts: 3
OurWorkBench thank you very much, when I loosened the screw that holds down the spring the thread went under the spring.
Now I must watch and read more to learn how to sew and restore the looks of the machine and wood cabinet.
Now I must watch and read more to learn how to sew and restore the looks of the machine and wood cabinet.
