shaned01

its not finished yet, but yalls thoughts? Im not focused on quilts but more general and clothes making along with computer workstation setup, trying to save space and be ergonomic....

sschick

It looks good for what you want, but I would be more inclined to have the sewing machine parallel to the front of the desk. I know you said you would be working more on clothes and such, but if you can swing it, having more space to support your project(s) would be a plus. Just my $0.02.

Shari

"cat"astrophy

I agree with sschick. If you could add a little more length on the end the sewing machine sets on and another side board going to the floor you could set your sewing machine parallel. Other than that suggestion, your plans looks great.

Onebyone

I agree with the other posters. I would want more room at my sewing machine no matter what I was sewing. The storage would be awkward and hard to access for me.

aashley333

I am right handed. I need more space on each side of my sewing machine, but especially the right side. I also love the drawers on the right side of my cabinet. I am constantly using those.

Snooze2978

I agree with what others have already mentioned. Possibly add an extension table to the left of your sewing machine that can be folded down when not needed and pulled up when you're working on large quilts.

QuiltE

First of all ... great for deciding to have something built that works for you!!! Despite questions from others as to the end placement of your machine, you know what works for you, the constraints of how this fits into the rest of the room space,, and how it would "feel" for you to work there.

Here's a way to perfect your personalized work space in the design phase ... when I was designing a new kitchen years ago, the best advice I got was that as I did stuff in my old kitchen to mentally put myself in the new one. Where was I storing the cookie sheets? oops, the new design doesn't hold my monster sheet! Where are the dishes going after washing and then setting the table?. Convenient? or out of the way? etc. So do the same while you are sewing, and reaching for thread, the machine accessories. That was one thing I noticed ... didn't see any allotted space for small stuff like that.

I'm guessing the measurements/distances you are using are from other sewing set-ups or what you have been currently using. Otherwise, suggest you check with other machine cabinetry. You mentioned this is for sewing and computer. Looks like that central computer area could also be your cutting table too?

To me, it looks a little close to the wall for my personal comfort. We don't need a lot of space there, as for me, that just fills with clutter ... but we do have stuff that goes there ... scissors, pin cushion/magnet, pattern instructions, stitch ripper etc. Also, for me, I might feel physically too trapped on the right. To give more open space on top, a row of drawers below could do the trick, plus provide close-by storage for the accessories, thread etc. while opening a bit of personal physical space. Of course, you may not have space to let you move further to the left and into the room.

While you are not focused on quilts, it sounds like there are times you are doing them, plus there's a lot of bulk/fabric if you are working on a pair of pants or dress, so like the others, I would consider adding more space to the left of the machine. Already suggested, it's easy enough done with a flip up/down wing.

Structurally, will that open end to the left of the machine be solid/safe? A post or a wall under it would give support. If a full wall, you could put small shelves on it that get covered over when the wing is in the downward position. Or a bank of drawers could create the support plus give some more "local" storage. Can you tell that I'm always trying to max out extra space to the best advantage?

In the end ...the important thing is "you do you" and do what is best for you ... and take the suggestions from our communal peanut gallery with a grain of salt!!

GOOD LUCK!! ... take your time with the design process, so you can get it right for YOU ... the time you put into it will pay off in many happy hours in your personal space!

bearisgray

Approximate dimensions of the unit would be helpful.

Also an approximation of the space you want to put the unit in.

Where do you plan to do your cutting and ironing/pressing?

Where are you planning go put all the "little ltuff" like sewing tools and office things like paper, pens, stapler, tape?

Is this to be a combined office and sewing space?

I remember going to sewing group and all that was "there" was a table and chairs. We broughg our sewing eauipment but some of us fook over almost a whole 6 foot x 30 inch table when working on a project. Going to classes required good manners concerning using only a fair share of the space and equipment available .

I could see getting drawer units that could tuck under the table for additional storage.

what is your "accumulation" style? I have heard of people that maybe do have the absolute minimum - loke one spool of thread, one pair of scissors, etc. I am not one of them.

Also need to consider electrical outlets and lighting.

Also - will your sewing machine be out all the time or would it be put away between sewing sessions?
Is your computer a laptop or dedktop?

One can function in a small space - if one has to.

Will this be a shared space?
do you have room for two chairs?

Onebyone

My kitchen is the L shape galley, a design not used often. Combination of galley and L shape. I tried to place my sewing room furniture in the same configuration. it really works for me.

SueZQ from MN

First off, we all have to work in a space that is comfortable for us whether we are left or right-handed, or have other issues. I am claustrophobic, so I have to have space around me, I am assuming that the opening next to your monitor is a window. Is that correct? If it is, then I would want my sewing machine in that area so I could see outside as I work. I don't know how much time you spend at the comuter, but if it were me, I'd move my computer and monitor to the end to the smaller space where the machine is now so I didn't have to move it or work around things when I want to utilize the larger flat space.
The next suggestions come from my own experience of having a corner desk where I sew, so might make some things more convenient for you. The area on the left end appears to have a nasty corner in the back on the floor that would be hard to access, especially if you have knee or mobility issues like I do. I would suggest having either drawers or roll out shelves put in that end so that the things stored back there would be more easily accessible. They would come to you instead of you having to try to get to them. Like others have mentioned, you need a bank of shallow drawers, and the front right corner would be the logical use of some wasted space, but maybe not the most convenient spot for them.You also need to add a.shallow pull out tray or drawer right under the tabletop wherever you will be using a chair so basic items like scissors and pens and paper are always handy. Lastly, I would have a special narrow vertical storage area for long or oversize rulers and spare cutting mats that you might not use all the time. Also a sheet of pegboard would be nice for smaller rulers and tools. Maybe that could go on the front end of the shelf wall.
A cuple of random thoughts. Don't foget to add holes to the tablaetop to run cords thru to the outlets. However many outlets you think you need, multiply by 2 or 3!!! Make the tabletop a height you are comfortable working at or that works with your sewing machine. Since you are having this made, customize it to you. Lastly install adjustable shelves that are closer together so that items are easier to get on and off of the shelves, especially those in the back corner,
Thank you for allowing me to "build" a dream work station at your expense. haha We would all love to be able to do what you are doing and spend the money to get evertyjing "just right for me". Good luck.