Go Back  Quiltingboard Forums >
  • Main
  • Question about printable quilting stencils >
  • Question about printable quilting stencils

  • Question about printable quilting stencils

    Thread Tools
     
    Old 11-16-2025, 12:51 PM
      #1  
    Member
    Thread Starter
     
    Join Date: Jan 2018
    Posts: 97
    Default Question about printable quilting stencils

    Hello,

    I'm still not great at fmq on my dsm, but I'm endeavoring to get better at it. (I spend far too much time piecing more tops and not enough time sandwiching and quilting them!). I was looking at the Leah Day printable quilting stencils, and they look like a great idea, but I wonder about how to avoid snapping my needle over and over again on the pins I use for sandwiching - which would be hidden under the paper. (I prefer to sandwich with pins for a number of different reasons, so using an adhesive to sandwich is not an option for me, unfortunately.)

    The quilt I'm tackling at the moment has some blocks that are really dark and some that are really light, and I haven't been able to trace or draw a pattern on them, using my markers, that is consistently visible against the various fabrics. That's what I'd usually do, since I'm not great at just freehanding yet.

    Has anyone ever used the printable paper stencils with pins? If so, how did you manage the hidden pins?

    Thanks for any advice!
    PiedPiper is offline  
    Old 11-16-2025, 03:30 PM
      #2  
    Senior Member
     
    Join Date: Aug 2020
    Posts: 457
    Default

    I would pin my quilt, then pin the quilting papers in place pinning through all layers. Then I'd remove the first pins (that held the layers together ) from under the papers... if that makes sense...
    ElaineCovid is offline  
    Old 11-16-2025, 05:25 PM
      #3  
    Member
     
    Join Date: Sep 2013
    Location: SW Indiana
    Posts: 71
    Default

    Could you make a mark on the paper where the hidden pins are so you could remove them when you get close?
    emcay is offline  
    Old 11-17-2025, 06:56 AM
      #4  
    Super Member
     
    Three Dog Night's Avatar
     
    Join Date: May 2011
    Location: Western Washington
    Posts: 1,073
    Default

    Originally Posted by ElaineCovid
    I would pin my quilt, then pin the quilting papers in place pinning through all layers. Then I'd remove the first pins (that held the layers together ) from under the papers... if that makes sense...
    This is what I would do too.
    Three Dog Night is offline  
    Old 11-17-2025, 05:54 PM
      #5  
    Super Member
     
    Butterflyblue's Avatar
     
    Join Date: May 2010
    Location: Texas
    Posts: 1,520
    Default

    Is thread basting an option for you?
    Butterflyblue is offline  
    Old 11-19-2025, 04:41 AM
      #6  
    Super Member
     
    Join Date: Sep 2010
    Location: Delaware
    Posts: 1,620
    Default

    I guess I’m missing something. Having used this type of paper overlay quilt patterns myself, if there are pins underneath how will you remove those pins when you sew to them without messing up the paper design? I normally use Elmer’s glue watered down a bit and a thin brush to glue baste my tops before quilting. So no pins to remove except those holding down the paper design. Picking out the paper once the top is quilted is time consuming but I’ve found a water brush helps with the pesky spots and speeds things up. Since I’ve used glue for the basting, I wash the quilt when completed.
    Lena1952 is offline  
    Old 11-19-2025, 11:03 AM
      #7  
    Senior Member
     
    Join Date: Jun 2013
    Location: Florida
    Posts: 566
    Default

    I also recently purchase Leah Day's quilting stencils. I used masking tape to apply them to the top of the quilt. I had a hard time following the stencil lines smoothly, although this process does have some potential. I just need more practice with it. I did one row across the middle of the quilt, but ended up removing the quilting stitches and doing straight line stitching.
    As far as basting, glue basting rules!! I wish I had learned this sooner. Watered down washable school glue works well, but can be a little messy (maybe it's just me). I love using 505 fabric glue spray- it works really well for me. But I need to take it outside to spray on my long 8 ft Costco table. Using pool noodles works well for bigger quilts when spray basting each layer.
    pinkflowers is offline  
    Old 01-06-2026, 08:24 AM
      #8  
    Member
    Thread Starter
     
    Join Date: Jan 2018
    Posts: 97
    Default

    Thank you for all your helpful replies! I decided to be a big girl and have a go at free motion on my own, stencil-free, since my quilt was already pinned. It wasn't the greatest, but it ended up working out pretty well, and I am growing in confidence with my FMQ!
    PiedPiper is offline  
    Old 01-08-2026, 07:17 AM
      #9  
    Member
     
    Join Date: Jul 2013
    Location: Harrison, Arkansas
    Posts: 14
    Default

    If thread basting is an option, Sharon Schamber has some old videos on YouTube on how to do this on a table. You can find them by searching "Sharon Schamber hand basting". I cannot crawl around on the floor like I used to. In her method, you roll your quilt top on a board, and the back on a different board, and lay the batting in the middle, and baste with a herringbone stitch. I usually make large quilts, like Queen size, and baste like this using 10' boards and two long tables placed end to end. This has worked wonderful for me, and keeps the layers held together well, even with the movement of pushing and pulling the quilt sandwich around as you quilt it, and you don't have the risk of the pins tearing your fabric. I just snip the threads as I go so that I don't risk pulling on my stitches. The last few that I've done, I've had friends to come over, and we made a fun day of it. I helped them do theirs, and they help me do mine.
    kdias is offline  
    Old 01-08-2026, 09:56 AM
      #10  
    Power Poster
     
    Join Date: Jul 2013
    Location: Houston, TX
    Posts: 10,668
    Default

    Originally Posted by PiedPiper
    Thank you for all your helpful replies! I decided to be a big girl and have a go at free motion on my own, stencil-free, since my quilt was already pinned. It wasn't the greatest, but it ended up working out pretty well, and I am growing in confidence with my FMQ!
    I took a class by RaNae Merrill. It was an online class. You had to do a square every day after watching her videos. It really helped me move my FMQ to the next level. I'm convinced that you need to just do a lot of it to get better.

    PS: I can't follow stencil to save my life!
    cashs_mom is offline  

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter