Usinga combination of washed & unwashed fabric in a quilt
#1
Member
Thread Starter
Join Date: May 2018
Posts: 2
Usinga combination of washed & unwashed fabric in a quilt
Has anyone used a combination of washed and unwashed fabric in a quilt? If the quilt was washed, how did it turn out?
I used to always wash the fabrics first but now I like to switch and not do that. Has anyone had success combining previously was fabrics and ones unwashed in the same quilt? I know I could it for a wall quilt but what about a bed quilt given as a gift?
Thanks for your responses!
I used to always wash the fabrics first but now I like to switch and not do that. Has anyone had success combining previously was fabrics and ones unwashed in the same quilt? I know I could it for a wall quilt but what about a bed quilt given as a gift?
Thanks for your responses!
#2
Super Member
Join Date: Jan 2011
Posts: 1,079
I use pre cuts a lot, and mix them with FQs and yardage (usually washed yardage), and I haven't noticed any difference in the final quilt after washing. They all seem to shrink at the same rate. No problems yet. So far. Sometimes, the batting creates troubles....but that is a whole different topic.
#3
Power Poster
Join Date: May 2008
Location: MN
Posts: 24,441
I have measured hundreds of fabrics (yes, really!) before and after washing them.
In my experience, fabrics do not shrink at the same rate. Assuming a 42-45 inch width of fabric - i have had some shrink up to 2.5 inches in width or length (per yard). Most only shrink about an inch in one direction or the other. Very few have little or no shrinkage, and I think one stretched a tiny bit.
Most of the fabrics I've washed shrink mainly in either length or width.
In my experience, fabrics do not shrink at the same rate. Assuming a 42-45 inch width of fabric - i have had some shrink up to 2.5 inches in width or length (per yard). Most only shrink about an inch in one direction or the other. Very few have little or no shrinkage, and I think one stretched a tiny bit.
Most of the fabrics I've washed shrink mainly in either length or width.
#4
Super Member
Join Date: Oct 2008
Location: The Finger Lakes of upstate NY
Posts: 3,457
Bonnie Hunter (www.quiltville.com) has talked about using fabrics that are washed and unwashed together. She is one of the most prolific quilters that I've ever seen. She's never had a problem.
I don't prewash - I prefer the crinkly look - and have not had a problem with anything yet. If I'm using a fabric that I'm concerned about - reds, purples - I test a piece.
I don't prewash - I prefer the crinkly look - and have not had a problem with anything yet. If I'm using a fabric that I'm concerned about - reds, purples - I test a piece.
#6
Power Poster
Join Date: Dec 2008
Location: Western Wisconsin
Posts: 12,930
As long as you are quilting fairly closely (lines 4" apart or less), there is no problem. This is because, once the fabrics are quilted, the batting limits how much any one fabric can shrink.
When washed by themselves, fabrics can shrink at drastically different rates. If you are using large pieces of fabric in a quilt and your quilting lines are far apart (say, 10"), then you can run into problems with varying rates of shrinkage.
When washed by themselves, fabrics can shrink at drastically different rates. If you are using large pieces of fabric in a quilt and your quilting lines are far apart (say, 10"), then you can run into problems with varying rates of shrinkage.
#7
Power Poster
Join Date: May 2008
Location: MN
Posts: 24,441
Bonnie Hunter (www.quiltville.com) has talked about using fabrics that are washed and unwashed together. She is one of the most prolific quilters that I've ever seen. She's never had a problem.
I don't prewash - I prefer the crinkly look - and have not had a problem with anything yet. If I'm using a fabric that I'm concerned about - reds, purples - I test a piece.
I don't prewash - I prefer the crinkly look - and have not had a problem with anything yet. If I'm using a fabric that I'm concerned about - reds, purples - I test a piece.
I have also had the majority - of every color - be "dye-fast" .
#9
Super Member
Join Date: May 2012
Location: Florida
Posts: 1,585
My concern with prewashing stems primarily because of the chemicals contained in the fabrics from the manufacturing process -- I am asthmatic, and I sure don't need anything adding to that. That being said, I have had problems with it for not prewashing the fabrics, so I always prewash everything, except the batting (and I use primarily poly batting, but not the cheap stuff). I'm not trying to get rid of the crinkly look -- I just don't want to have asthma attacks because those can kill you. Another reason for prewashing, and my primary reason, is the bleeding dyes. That problem could ruin a quilt, so I don't chance it. I've had a lot of fabrics that did bleed, so I test them, treat them if necessary, and then use them, knowing they won't bleed after the dye has been set.
#10
Super Member
Join Date: Dec 2010
Location: Chula Vista CA
Posts: 7,361
I am like Jeanette - I prewash my fabrics to remove the chemicals - they eat my fingers and destroy my finger nails. I have used unwashed fabric with my washed fabric without any bad results. But I tend to even wash my pre-cuts to remove the chemicals too.
Thread
Thread Starter
Forum
Replies
Last Post