Go Back  Quiltingboard Forums > Tutorials
Really Easy Half Square Triangle Blocks >

Really Easy Half Square Triangle Blocks

Really Easy Half Square Triangle Blocks

Old 02-25-2010, 08:04 AM
  #1  
Power Poster
Thread Starter
 
Rhonda's Avatar
 
Join Date: Mar 2009
Location: Salem Iowa
Posts: 15,666
Default

Do you have trouble making HSTs? I think my method is really easy. No dog ears no cutting out squares and sewing down the middle on each side of a line.

A mini cutting mat or a turntable cutting mat would be good. You can cut without a mini but it would make it easier to do.

You will need a template of whatever size you are making. If you don't have a template you can cut one from stiff cardboard or template plastic but these will be prone to getting cut. And the corners may not be accurate with cardboard or thin plastic.

But you won't have to buy any thing to make your HSTs. No paper piecing or Thangles or any other expense.

If you haven't seen my thread then here is my link for free templates. If you need a size other than any of these just let me know.

http://www.quiltingboard.com/t-36008-1.htm

We make these up ahead and then have them on hand for whatever I decide to make. This works well with scraps too. I just make two piles one dark colors and one light and then I take one of each and sew them together and then cut out the square from the center. You can sew them like flags and it goes pretty quick. Then we go back and cut out the squares. Any leftovers can be recycled.

Ok here we go. Here is my cut down version for making Half Square Triangles.

I used a 2 1/2" template and cut my strips 2 1/2" x 11"
This will give you 5 HSTs. Youcan make your strips longer but this works well for me.

Turn your mat and cut along the next side
[ATTACH=CONFIG]20375[/ATTACH]

Sew your two strips together
[ATTACH=CONFIG]20550[/ATTACH]

Iron the seams open for a flat surface
[ATTACH=CONFIG]20596[/ATTACH]

Place your template on the strips at the bottom. Place two corners on the seam. Make sure your corners are accurately placed for a better HST
[ATTACH=CONFIG]20599[/ATTACH]

Cut along one side
[ATTACH=CONFIG]20665[/ATTACH]

Continue turning the mat and cutting as you cut the other two sides
[ATTACH=CONFIG]20669[/ATTACH]
Attached Thumbnails attachment-20150.jpe   attachment-20375.jpe   attachment-20376.jpe   attachment-20377.jpe   attachment-20378.jpe  

attachment-20379.jpe   attachment-20380.jpe   attachment-20452.jpe   attachment-20550.jpe   attachment-20596.jpe  

attachment-20599.jpe   attachment-20665.jpe   attachment-20669.jpe   attachment-20670.jpe   attachment-20671.jpe  

attachment-20673.jpe  
Rhonda is offline  
Old 02-25-2010, 08:38 AM
  #2  
Power Poster
Thread Starter
 
Rhonda's Avatar
 
Join Date: Mar 2009
Location: Salem Iowa
Posts: 15,666
Default

Now the pieces that are left at the top and bottom can be used to make a 4 patch. There is very little waste with this method.

The two ends facing each other
[ATTACH=CONFIG]20385[/ATTACH]

Trim the edges
[ATTACH=CONFIG]20386[/ATTACH]

Match up the seams
[ATTACH=CONFIG]20387[/ATTACH]

The two seams together
[ATTACH=CONFIG]20388[/ATTACH]

I like to tack the seams so they can't move when I sew
[ATTACH=CONFIG]20389[/ATTACH]

Use a template to cut out the 4 patch Make sure your template corners are on the seams accurately or your 4 patch will be off on the corners
[ATTACH=CONFIG]20390[/ATTACH]

Sew them together
[ATTACH=CONFIG]20525[/ATTACH]

And voila a 4 patch!
[ATTACH=CONFIG]20526[/ATTACH]
Attached Thumbnails attachment-20385.jpe   attachment-20386.jpe   attachment-20387.jpe   attachment-20388.jpe   attachment-20389.jpe  

attachment-20390.jpe   attachment-20525.jpe   attachment-20526.jpe  
Rhonda is offline  
Old 02-25-2010, 08:46 AM
  #3  
Power Poster
 
nativetexan's Avatar
 
Join Date: Feb 2009
Location: home again, after 27 yrs!
Posts: 19,388
Default

fabulous!!!!!
nativetexan is offline  
Old 02-25-2010, 08:51 AM
  #4  
k3n
Power Poster
 
k3n's Avatar
 
Join Date: Feb 2009
Location: Somerset, England
Posts: 10,686
Default

Rhonda that's great! I'd seen you do the first stage before but not seaming and using the offcuts and the groovy little 4 patch! Have to try this! Thanks so much for sharing.
k3n is offline  
Old 02-25-2010, 08:55 AM
  #5  
k3n
Power Poster
 
k3n's Avatar
 
Join Date: Feb 2009
Location: Somerset, England
Posts: 10,686
Default

Just had another look - sooooo clever! Now what can I make with lots of HSTs? LOL
k3n is offline  
Old 02-25-2010, 09:10 AM
  #6  
Power Poster
Thread Starter
 
Rhonda's Avatar
 
Join Date: Mar 2009
Location: Salem Iowa
Posts: 15,666
Default

K this is how I used to do it. As I work in scrappy mostly I don't really do alot this way anymore but if you are doing a bunch of the same fabrics this is a quick easy way to do them. I actually started out seaming the strips on both sides and laying the template on the seam and only cutting out one half of the triangle. This works ok but I felt I had better accuracy with the strips open. Both would be fine to use. This is actually a bit quicker to do. But you do have to clean up the squares sometimes from dogears on some of them.

Seam on both sides
[ATTACH=CONFIG]20601[/ATTACH]

Cut one triangle from the seam on one side then place the template on the other seam and cut out.
[ATTACH=CONFIG]20602[/ATTACH]

Here are the HSTs from the strips
[ATTACH=CONFIG]20603[/ATTACH]
Attached Thumbnails attachment-20601.jpe   attachment-20602.jpe   attachment-20603.jpe  
Rhonda is offline  
Old 02-25-2010, 09:35 AM
  #7  
k3n
Power Poster
 
k3n's Avatar
 
Join Date: Feb 2009
Location: Somerset, England
Posts: 10,686
Default

Oh that's cool too! Would you say that's better for longer strips? I also want to preempt any 'fear of bias' comments - since working with OBWs I don't have this anymore, but personally I'd starch the fabric well before cutting. Bias is your FRIEND - it's there to make things FIT! LOL
k3n is offline  
Old 02-25-2010, 09:46 AM
  #8  
Power Poster
Thread Starter
 
Rhonda's Avatar
 
Join Date: Mar 2009
Location: Salem Iowa
Posts: 15,666
Default

Originally Posted by k3n
Oh that's cool too! Would you say that's better for longer strips? I also want to preempt any 'fear of bias' comments - since working with OBWs I don't have this anymore, but personally I'd starch the fabric well before cutting. Bias is your FRIEND - it's there to make things FIT! LOL
I did spray with sizing before I cut but I have never had a problem with bias so I don't think that way. Tho it could be because I usually work in the small stuff and bias isn't an issue there.

As to the length of the strip I would say you can make it as long as you want. You will have to swivel the mini mat but that is just a matter of flipping the length out of the way. I also don't actually measure my strips I just rough cut and open the seams and cut. But I did measure these for those who cannot handle the rough cutting. A lot of people do not like to waste anything so I went with the flo so that would not be an issue here. for me it is faster to just cut and sew with out all the measuring but each to their own. I am about fast and a little waste doesn't bother me.
Rhonda is offline  
Old 02-25-2010, 09:47 AM
  #9  
Junior Member
 
racnquilter's Avatar
 
Join Date: Dec 2007
Location: SW OK
Posts: 199
Default

Thanks for the quick tip Rhonda. Going to be working on a project that has a ton of half-square triangles and this will make it go so fast.
racnquilter is offline  
Old 02-25-2010, 09:56 AM
  #10  
Power Poster
Thread Starter
 
Rhonda's Avatar
 
Join Date: Mar 2009
Location: Salem Iowa
Posts: 15,666
Default

You're welcome! It bothered me to see so many people having to struggle to make HSTs. They really aren't that difficult.
I hope this tutorial helps!
Rhonda is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Marcy J.
Main
5
03-20-2013 11:53 AM
Dee Dee
Main
10
07-08-2011 08:05 AM
craftybear
Links and Resources
4
04-05-2011 03:05 PM
sondray
Links and Resources
0
12-07-2009 05:15 PM
sondray
Links and Resources
0
12-07-2009 05:12 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter