V-D9P - Varient D9P
#1
Super Member
Thread Starter
Join Date: Mar 2011
Location: Pratt Kansas
Posts: 1,222
Make a 9 patch per the layout in photo 2.
Your ratio is 1:1.5, so
3" x 4.5"
6" x 9"
etc.
If you know one block dimension and not the other:
smaller, multiply by 1.5
larger, divide by 1.5
This will give you the other dimension.
Your ratio is 1:1.5, so
3" x 4.5"
6" x 9"
etc.
If you know one block dimension and not the other:
smaller, multiply by 1.5
larger, divide by 1.5
This will give you the other dimension.
Your original cornerstones will become your vd9p focus blocks, so be aware of placement.
[ATTACH=CONFIG]234208[/ATTACH]
This example cuts the long side first. Example is 4, subtract 1 seam allowances. Divide by 3. Add 1/4 back to that measurement. Measure to the middle from the sides, and cut.
[ATTACH=CONFIG]234209[/ATTACH]
Leaving center in place, move left piece to right side and move right piece to left side.
[ATTACH=CONFIG]234214[/ATTACH]
Measure your other middle section. Example is 5, subtract 1 seam allowances. Divide by 3. Add 1/4 back to that measurement. Measure to the middle from the sides, and cut.
[ATTACH=CONFIG]234215[/ATTACH]
Again, leave center pieces in place. Move 3 right pices to left and 3 left pieces to right.
[ATTACH=CONFIG]234229[/ATTACH]
#2
Super Member
Thread Starter
Join Date: Mar 2011
Location: Pratt Kansas
Posts: 1,222
Using Connecting Thread's Golden Afternoon collection
pieces were 3 x 5.25
cuts were
wide
4 3/4 minus 1 = 3 3/4
3 3/4 divided by 3 = 1 1/4
1 1/4 plus 1/4 = 1 1/2 cut in from block edges on both sides
narrow
2 1/2 minus 1 = 2
2 divided by 3 = .67
.67 plus .25 = .92
(7/8 =.875) I cut 7/8 in from block edges on both sides. If you WANT to cut slightly less than 15/16, fine by me :mrgreen:
pieces were 3 x 5.25
cuts were
wide
4 3/4 minus 1 = 3 3/4
3 3/4 divided by 3 = 1 1/4
1 1/4 plus 1/4 = 1 1/2 cut in from block edges on both sides
narrow
2 1/2 minus 1 = 2
2 divided by 3 = .67
.67 plus .25 = .92
(7/8 =.875) I cut 7/8 in from block edges on both sides. If you WANT to cut slightly less than 15/16, fine by me :mrgreen:
here are 4 of the uncut 9 patches (upper right block in layout)
[ATTACH=CONFIG]234497[/ATTACH]
bottom right block in layout
[ATTACH=CONFIG]234498[/ATTACH]
Upper left block in layout
[ATTACH=CONFIG]234500[/ATTACH]
bottom middle in Layout
[ATTACH=CONFIG]234515[/ATTACH]
Layout
[ATTACH=CONFIG]234516[/ATTACH]
Alternate Layout
[ATTACH=CONFIG]234517[/ATTACH]
Thread
Thread Starter
Forum
Replies
Last Post
craftybear
Links and Resources
0
09-10-2011 02:13 PM
AngieS
Main
48
06-14-2011 08:31 PM