Old 03-05-2012, 09:45 PM
  #88  
dublb
Super Member
 
Join Date: Apr 2010
Location: Brady TX
Posts: 6,598
Default

First I want ta say that I'm not happy with this block. The contrast is wrong & it won't lay flat! I also scorched some of the starch when I put these borders on.
[ATTACH=CONFIG]317737[/ATTACH]
I use moleskin for my 1/4 inch 'cause I haven't got a 1/4 inch foot for this machine. (A 401A)
[ATTACH=CONFIG]317738[/ATTACH]
This picture & the next show where the 1/4 place is on the walking foot.
[ATTACH=CONFIG]317739[/ATTACH]
This one shows exactly where the fabric lines up with the mole skin.
[ATTACH=CONFIG]317740[/ATTACH]
I can see where the edge of the fabric is supposed ta be through the opening in the foot.
[ATTACH=CONFIG]317741[/ATTACH]
Press the fabric with the tiny border open.
[ATTACH=CONFIG]317743[/ATTACH]
When you have the next border (blue in this case) on the block you line the first stitch line with walking foot 1/4 inch spot.
[ATTACH=CONFIG]317744[/ATTACH]
Another view so you can git the idea.
[ATTACH=CONFIG]317745[/ATTACH]
Press both sides open & trim the seam allowance ta 1/4.

[ATTACH=CONFIG]317746[/ATTACH]
Tada!
Attached Thumbnails tiny-border-tute-4.jpg   tiny-border-tute-6.jpg   tiny-border-tute-7.jpg   tiny-border-tute-9.jpg   tiny-border-tute-5.jpg  

tiny-border-tute-10.jpg   tiny-border-tute-11.jpg   tiny-border-tute-12.jpg   tiny-border-tute-13.jpg   tiny-border-tute-16.jpg  


Last edited by dublb; 03-05-2012 at 09:52 PM.
dublb is offline