hand crank?
#1
Super Member
Thread Starter
Join Date: Jan 2011
Posts: 1,079
hand crank?
It's pretty, but is it a hand crank? or is something missing?
http://portland.craigslist.org/mlt/atd/3532098418.html
here's another, & I like it better....but what's a good offer?
http://portland.craigslist.org/clk/atq/3546363919.html
http://portland.craigslist.org/mlt/atd/3532098418.html
here's another, & I like it better....but what's a good offer?
http://portland.craigslist.org/clk/atq/3546363919.html
Last edited by mindless; 01-15-2013 at 05:55 PM.
#3
The first one is missing the hand crank but the decals (called La Vincedora) are gorgeous, although they're partially worn away on the front edge. I don't think I'd pay that much for it - maybe $50-60.
I don't usually make offers, but the second machine (with the Victorian decals) I would probably go with makitmama's suggestion and offer $35-40 and go up to $55-60. UNLESS the decals and paint are in really great condition - in which case I'd end up somewhere around $75-100.
I don't usually make offers, but the second machine (with the Victorian decals) I would probably go with makitmama's suggestion and offer $35-40 and go up to $55-60. UNLESS the decals and paint are in really great condition - in which case I'd end up somewhere around $75-100.
#5
Hello Mindless.
Make sure that any long bobbin machine has the shuttle. It's surprising how many people don't know what the shuttle is and would cheerfully sell a machine without it.
Also ask whether it has bobbins. You need at least one to try it out. After that spare long bobbins for Singers are fairly easy to get hold of.
That old bracket around the first machine isn't for a hand crank. I'm a bit puzzled by it.
Make sure that any long bobbin machine has the shuttle. It's surprising how many people don't know what the shuttle is and would cheerfully sell a machine without it.
Also ask whether it has bobbins. You need at least one to try it out. After that spare long bobbins for Singers are fairly easy to get hold of.
That old bracket around the first machine isn't for a hand crank. I'm a bit puzzled by it.
#6
I have a Priscilla sewing machine from the same era that has a curved motor bracket like that. It is quite ornamental. Mine has the bracket broken at the same location, which is a curved section that bends back and supports the motor. In the photo, mine looks lower than the CL machine, but that is because I loosened the bolt.
Last edited by makitmama; 01-16-2013 at 05:10 AM.
Thread
Thread Starter
Forum
Replies
Last Post