Featherweight won't stop
#1
Featherweight won't stop
Finally getting around to working on some of the machines and this is the first one that is giving me fits. Plug it in and it goes, full speed. The foot controller doesn't affect anything. I know I've read about this problem before on the forum but I wasn't finding it and the sewing machine place closes early today if I need parts so I thought a direct appeal rather than further searching was in order. Anyone have any ideas? The wiring looks good but I haven't pulled the foot control apart to see what's inside of it yet.
#2
Super Member
Join Date: Feb 2012
Posts: 8,091
Flip the machine over and pull the bottom off. Look for capacitors. If you find any, remove them. There could be two in the machine and could be one in the foot controller too. They were used to reduce interference on televisions back in the old black and white days.
http://thefeatherweight221factory.com/page10.php
Follow the big red arrow to the lower left and click on "the machine runs on it's own".
Joe
http://thefeatherweight221factory.com/page10.php
Follow the big red arrow to the lower left and click on "the machine runs on it's own".
Joe
#3
Joe, thanks. In this case that wasn't it, though. At some point someone was using the cord to pull the plug block out of the machine rather than the handy-dandy indents that were put there for that purpose. Pulled the plug block apart and it was immediately obvious that I had a short. Fixed that and it works great. Yay!
Thread
Thread Starter
Forum
Replies
Last Post
nanna-up-north
For Vintage & Antique Machine Enthusiasts
13
10-28-2013 12:53 PM
lisalisa
General Chit-Chat (non-quilting talk)
54
02-19-2011 11:01 AM