Anyone on here own a Singer 31-15 industrial machine?
#1
Super Member
Thread Starter
Join Date: Sep 2009
Location: Massachusetts, USA
Posts: 1,775
Anyone on here own a Singer 31-15 industrial machine?
I am trying to help an elderly lady get her Singer 31-15 machine going and she thought it might need a new belt. It's an odd machine....sort of like a treadle but also electrified. I would love to have a picture of how the belt looks when it's on correctly.
I've already found, by searching pictures on the internet, that I was trying to put the belt 'in front' of the bobbin pulley rather than in back of it. When I turned the machine on the belt was smoking where it passed around the bottom pulley. I don't know if it was because the belt was too loose, too tight or just because I had incorrectly brought it up in front of the bobbin pulley (not sure if that is the right name for it).
Any advice would be greatly appreciated!!
I've already found, by searching pictures on the internet, that I was trying to put the belt 'in front' of the bobbin pulley rather than in back of it. When I turned the machine on the belt was smoking where it passed around the bottom pulley. I don't know if it was because the belt was too loose, too tight or just because I had incorrectly brought it up in front of the bobbin pulley (not sure if that is the right name for it).
Any advice would be greatly appreciated!!
#2
Super Member
Join Date: Dec 2011
Location: Northern CA near Sacramento
Posts: 1,107
Cathy,
Depending on where the bobbin winder is screwed into the table, it is supposed to be in front of the belt. To engage the bobbin winder push it backwards until it pushes on the belt (it will click into place). It should pop back/ disengage when its full.
Cathy
Depending on where the bobbin winder is screwed into the table, it is supposed to be in front of the belt. To engage the bobbin winder push it backwards until it pushes on the belt (it will click into place). It should pop back/ disengage when its full.
Cathy
#3
Super Member
Thread Starter
Join Date: Sep 2009
Location: Massachusetts, USA
Posts: 1,775
Thanks. The bobbin winder is on the cabinet in the front right corner. I'm hoping that putting the belt in the right place will help. It was so weird to see the belt smoking.... ....white smoke just billowing up from under the machine. Of course, those machines have an awesome amount of power and speed. I'm also wondering if having the belt too tight would make it smoke. When it was looser it wasn't turning the wheel.
This is my first "tune-up/repair" that I'm doing for someone else. I put an ad in the paper and this elderly woman called because she had been searching for over a year to have someone come out and repair her machine. Leave it to me to have my first repair be a machine that I've never seen before and can't find much info about it on the internet...
This is my first "tune-up/repair" that I'm doing for someone else. I put an ad in the paper and this elderly woman called because she had been searching for over a year to have someone come out and repair her machine. Leave it to me to have my first repair be a machine that I've never seen before and can't find much info about it on the internet...
Last edited by cabbagepatchkid; 10-05-2012 at 05:08 AM.
#4
Super Member
Join Date: Jan 2011
Location: Sierra Vista, AZ
Posts: 3,992
http://www.sil.si.edu/DigitalCollect.../sil10-202.pdf
Cathy, try this link, it may help you. It is a digital reproduction of the manual.
Cathy, try this link, it may help you. It is a digital reproduction of the manual.
Last edited by Caroline S; 10-05-2012 at 07:29 AM.
#5
Super Member
Thread Starter
Join Date: Sep 2009
Location: Massachusetts, USA
Posts: 1,775
http://www.sil.si.edu/DigitalCollect.../sil10-202.pdf
Cathy, try this link, it may help you. It is a digital reproduction of the manual.
Cathy, try this link, it may help you. It is a digital reproduction of the manual.
Thread
Thread Starter
Forum
Replies
Last Post
tkee
For Vintage & Antique Machine Enthusiasts
8
07-23-2013 08:13 AM
Caroline S
For Vintage & Antique Machine Enthusiasts
1
06-17-2012 09:14 AM
lovetocraft
General Chit-Chat (non-quilting talk)
6
08-30-2011 06:46 AM