How do you treadlers do it?

Old 11-24-2012, 06:09 AM
  #11  
Super Member
Thread Starter
 
Join Date: Feb 2012
Posts: 8,091
Default

Originally Posted by pinkCastleDH View Post
Joe, I finally have the tubing belt working on Colette. At first I was having terrible slippage problems but once I cleaned the track on the flywheel most of it went away. Then I shortened the belt a couple of times until it seems it finished its stretch in period.
While I was fighting with this thing last night, that is what I did. Cleaned the big wheel grove and the belt. Then shortened it.
Didn't seem to help any. I might just try cleaning it some more. That can't hurt. And I think I could shorten the belt a bit more too.

Joe
J Miller is offline  
Old 11-24-2012, 06:26 AM
  #12  
Power Poster
 
Join Date: Mar 2011
Location: Ontario, Canada
Posts: 41,431
Default

If I have a tricky part, I just use the hand wheel instead of treadling.
Tartan is offline  
Old 11-24-2012, 06:59 AM
  #13  
Senior Member
 
pinkCastleDH's Avatar
 
Join Date: Sep 2011
Location: Wisconsin
Posts: 457
Default

Originally Posted by J Miller View Post
While I was fighting with this thing last night, that is what I did. Cleaned the big wheel grove and the belt. Then shortened it.
Joe, what did you clean it with? I think I ended up using alcohol and that stopped the slippage - I probably had some oil on there somewhere.
pinkCastleDH is offline  
Old 11-24-2012, 07:44 AM
  #14  
Super Member
 
thepolyparrot's Avatar
 
Join Date: Nov 2010
Location: Mars
Posts: 2,549
Default

The leather belt will probably help you a lot. When you first get it, take an end in each hand and stretch it across your shoulders. If you stretch it enough, you probably won't have to adjust the belt for a good long while afterward.

Then, practice. A lot. Sew without thread or chain-piece blocks or whatever you want to do. After a couple of days, you'll be able to sew one stitch at a time using only the treadle.

The 66-1 has no reverse, so to strengthen the ends of seams, either turn them 180° and sew back for half an inch or (as my grandmother taught me) just pull on the fabric to slow the feed for the last half inch - this puts the stitches very close together.

Honest, you'll get the hang of treadling very soon with a little practice. I love using the treadle when I need to pay attention to where every stitch will go.

Or when the power goes out. Last time we lost power for a few hours, the other humanoids in the house were whiny and bored but I couldn't hear them - I sat and sewed with my iPod in, listening to old radio shows from the 30's & 40's.

Have fun with it and don't be discouraged - you feel like you have a couple of extra feet at first, but that goes away pretty fast.
thepolyparrot is offline  
Old 11-24-2012, 08:01 AM
  #15  
Super Member
Thread Starter
 
Join Date: Feb 2012
Posts: 8,091
Default

Originally Posted by pinkCastleDH View Post
Joe, what did you clean it with? I think I ended up using alcohol and that stopped the slippage - I probably had some oil on there somewhere.
Denatured alcohol. I used the last of my bottle on it.

Joe
J Miller is offline  
Old 11-24-2012, 08:03 AM
  #16  
Super Member
Thread Starter
 
Join Date: Feb 2012
Posts: 8,091
Default

thepolyparrot,

I'm not quite that much of a novice. I've been using treadles for a bit over a year now. So I've got the basics down. This one and the start, stop just got to me last night.

Joe
J Miller is offline  
Old 11-24-2012, 08:07 AM
  #17  
Super Member
 
lovelyl's Avatar
 
Join Date: Apr 2011
Location: SW Ohio
Posts: 2,103
Default

Originally Posted by pinkCastleDH View Post
Linda, do you stop with the treadle horizontal or at the top/bottom of the stroke? I realize you can't always stop with your feet in a specific position but when I can I try to stop with the treadle horizontal. My legs (I'm actually getting the two foot thing down at last) seem to remember which way they were going and I almost always start up again going the right direction. In fact, with that revelation I'm going to try the 9W (opposite throw of the hand wheel) again since I won't need to help start it by hand as often.
I guess I never paid attention to the position of the treadle when I stop. I will have to try that and see how it goes. The only thing I have actually made on my 66-1 is a quilted grocery bag holder. It came out really nice, but I ripped out a lot of "backwards" stitching! I will pay attention to where the treadle is when I stop and practice some more. I really do like using it. Such a feeling of connection to the past.
Thanks for the advice!
lovelyl is offline  
Old 11-24-2012, 08:16 AM
  #18  
Super Member
Thread Starter
 
Join Date: Feb 2012
Posts: 8,091
Default

Linda, one of the things I usually do is watch carefully and as I come to the end of the seam, I'll reach over and grab the hand wheel and stop it before it goes too far.

Also when you start again, turn the hand wheel to get the machine going then take over with the treadle. Some of my machines I can start them by the pedal and they'll go the right direction. The one I was working with last night was being a cranky so and so and wanted to stall and turn backwards. So I ended up using the hand wheel a lot more than normal.

pinkcastleDH,
I haven't paid any attention to where the foot pedal is when I stop either. I'll pay more attention to it when next I use a treadle.

Joe
J Miller is offline  
Old 11-24-2012, 08:34 AM
  #19  
Super Member
 
lovelyl's Avatar
 
Join Date: Apr 2011
Location: SW Ohio
Posts: 2,103
Default

Originally Posted by J Miller View Post
Linda, one of the things I usually do is watch carefully and as I come to the end of the seam, I'll reach over and grab the hand wheel and stop it before it goes too far.

Also when you start again, turn the hand wheel to get the machine going then take over with the treadle. Some of my machines I can start them by the pedal and they'll go the right direction. The one I was working with last night was being a cranky so and so and wanted to stall and turn backwards. So I ended up using the hand wheel a lot more than normal.

pinkcastleDH,
I haven't paid any attention to where the foot pedal is when I stop either. I'll pay more attention to it when next I use a treadle.

Joe
Thanks, Joe. I hope to have some time this evening to practice. If you hear screaming coming from Ohio you will know it is not going well...
lovelyl is offline  
Old 11-24-2012, 09:19 AM
  #20  
Super Member
Thread Starter
 
Join Date: Feb 2012
Posts: 8,091
Default

Linda,

I'm glad you didn't hear what I was saying last night. I'm glad my wife isn't timid cos I think I embarrassed myself.

Joe
J Miller is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
HiDesertQuilter
For Vintage & Antique Machine Enthusiasts
2
03-19-2012 06:08 AM
madamekelly
Links and Resources
1
03-01-2011 04:48 AM
barbsbus
Main
2
09-23-2009 03:07 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter