I need to Refurb Singer 400/500 controllers
#1
Super Member
Thread Starter
Join Date: Mar 2016
Posts: 2,890
I need to Refurb Singer 400/500 controllers
The controller on my 401 sticks on "go" and is slow to start. The controller on my 503 is slow to start as well. They appear to be identical controllers. I have looked for a tutorial on cleaning and refurbing them, but not had much luck. This youtube video is probably good https://www.youtube.com/watch?v=v2HKgKxPQ1I, but he just talks about fixing it. He's already done it. Unfortunately, he might as well be saying, "blah, blah, blah, blah". My brain does not work well with spoken instructions. (I'm auditorily challenged.) I need to see it or read it.
Is there a tutorial or an easy fix that you know about that I can find online?
bkay
Is there a tutorial or an easy fix that you know about that I can find online?
bkay
#2
Super Member
Join Date: Sep 2015
Posts: 1,963
On the Archaic Arcane blog is a rather good one, maybe in two separate posts. I can't make links at the moment, but should be possible to search up. One part of it is to clean and polish up the parts themselves; another is to adjust them for a good speed range from stop to start. I think there's only one adjustment nut to set the distance for movement or push on the parts that control speed. Speed should be gradual from stop to full.
Some have reported improvement when they have had the carbon disks out of the bakelite casing and cleaned them carefully. There's often a sort of putty or chalk seal on top, and it can look like it's permanent but in but it comes off. These disks brake easily, so handle them gently, have them flat on a smooth surface, and rub them dustyfree with a microfiber cloth. This might not be necessary, and it's a bit dusty, similar to the dust comming of a pencil tip when you sharpen it.
Yet another thing is developing a feel for the pedal, I use it the wrong way around from Singers original suggestion, I have my foot on top of it and use my big toe to push it down. If you have shoes with proper sole on, you rest your foot on the solid button, and press gently on the push button. Both ways work fine.
Some have reported improvement when they have had the carbon disks out of the bakelite casing and cleaned them carefully. There's often a sort of putty or chalk seal on top, and it can look like it's permanent but in but it comes off. These disks brake easily, so handle them gently, have them flat on a smooth surface, and rub them dustyfree with a microfiber cloth. This might not be necessary, and it's a bit dusty, similar to the dust comming of a pencil tip when you sharpen it.
Yet another thing is developing a feel for the pedal, I use it the wrong way around from Singers original suggestion, I have my foot on top of it and use my big toe to push it down. If you have shoes with proper sole on, you rest your foot on the solid button, and press gently on the push button. Both ways work fine.
Last edited by Mickey2; 12-14-2017 at 05:10 PM.
#3
I'm not sure if quote from other thread will work:
Thanks, I think?!! I haven't laughed like that in a long time
Janey - Neat people never make the exciting discoveries I do.
#4
Super Member
Thread Starter
Join Date: Mar 2016
Posts: 2,890
On the Archaic Arcane blog is a rather good one, maybe in two separate posts. I can't make links at the moment, but should be possible to search up. One part of it is to clean and polish up the parts themselves; another is to adjust them for a good speed range from stop to start. I think there's only one adjustment nut to set the distance for movement or push on the parts that control speed. Speed should be gradual from stop to full.
Some have reported improvement when they have had the carbon disks out of the bakelite casing and cleaned them carefully. There's often a sort of putty or chalk seal on top, and it can look like it's permanent but in but it comes off. These disks brake easily, so handle them gently, have them flat on a smooth surface, and rub them dustyfree with a microfiber cloth. This might not be necessary, and it's a bit dusty, similar to the dust comming of a pencil tip when you sharpen it.
Yet another thing is developing a feel for the pedal, I use it the wrong way around from Singers original suggestion, I have my foot on top of it and use my big toe to push it down. If you have shoes with proper sole on, you rest your foot on the solid button, and press gently on the push button. Both ways work fine.
Some have reported improvement when they have had the carbon disks out of the bakelite casing and cleaned them carefully. There's often a sort of putty or chalk seal on top, and it can look like it's permanent but in but it comes off. These disks brake easily, so handle them gently, have them flat on a smooth surface, and rub them dustyfree with a microfiber cloth. This might not be necessary, and it's a bit dusty, similar to the dust comming of a pencil tip when you sharpen it.
Yet another thing is developing a feel for the pedal, I use it the wrong way around from Singers original suggestion, I have my foot on top of it and use my big toe to push it down. If you have shoes with proper sole on, you rest your foot on the solid button, and press gently on the push button. Both ways work fine.
Thanks, I'll look for her tutorials.
bkay
Thread
Thread Starter
Forum
Replies
Last Post
this is a stitch up
For Vintage & Antique Machine Enthusiasts
5
11-15-2018 07:46 AM
bkay
For Vintage & Antique Machine Enthusiasts
9
01-20-2018 06:50 PM
IrelandDragonQuilting
Main
3
02-05-2011 02:02 PM