I need help to fine machine Parts!
01-23-2022, 11:09 PM
#1
Senior Member
Thread Starter
Join Date: Jul 2010
Posts: 488
I need help to fine machine Parts!
MY 93yr. Mom decided to clean her vintage J.C. Penny model #1740 sewing machine. She has no idea where she put the screws she took out of the bed( between area right of feed dogs --------to arm of machine where the motor is housed. I'm not sure what this are may be called by other sewer. I called the number on the instruction manual. It was answered by Brother Inc. LLC. Which basically said, Everyone should get their virus shots. I order screws from most Name Brand Machine Companies. My go to-- Sewing on-line , had nothing. I tried private Business to no avail. Tinker
01-24-2022, 08:07 AM
#2
Super Member
Join Date: Mar 2015
Location: Denver, CO
Posts: 4,258
Are you referring to the needle plate screws or something on the under side? The needle plate would look like https://www.sewingpartsonline.com/ne...ger-52033.aspx I tried to find an image of the machine and could not find one. I didn't realize there were so many different needle plate screws. https://www.sewingpartsonline.com/se...0plate&index=1
I am thinking that probably the machine was probably made in Taiwan or Japan. Since many of these machines are considered 15 class machines, there are probably many parts that would be similar to some Singer parts.
Janey - Neat people never make the exciting discoveries I do.
Not affiliated with off-site link(s)
I am thinking that probably the machine was probably made in Taiwan or Japan. Since many of these machines are considered 15 class machines, there are probably many parts that would be similar to some Singer parts.
Janey - Neat people never make the exciting discoveries I do.
Not affiliated with off-site link(s)
