Go Back  Quiltingboard Forums > Main > For Vintage & Antique Machine Enthusiasts
Plastic vs. metal bobbins for old machines >

Plastic vs. metal bobbins for old machines

Plastic vs. metal bobbins for old machines

Old 07-29-2011, 10:17 AM
  #11  
Power Poster
 
Join Date: Nov 2009
Location: Mableton, GA
Posts: 11,185
Default

None of my machines are particular. I use either plastic or metal, depending on which I grab. I have two vintage singers, one a treadle using a class 15 and one an electric using a class 66. I use plastic or metal on my dinky mechanical Brother which is the least fussy machine I have ever owned. It doesn't care about bobbins, threads or needles and will sew anything. (I feel like I bragged on it too much and now when I go to use it it will crash on me!!!!!!!) Of course the featherweight uses it's own bobbin, and I only have metal ones. Maybe that's all that's made for it.
Stitchnripper is online now  
Old 07-29-2011, 11:14 AM
  #12  
Super Member
 
Join Date: Feb 2010
Location: Maryland
Posts: 3,586
Default

Originally Posted by bearisgray
I really wish bobbins had some sort of labeling on them so I would know which one is which.
I know. I have 2 singers that both use plastic bobbins that look very very similar. I had to put nail polish on one set so I could tell the difference because they didn't fit each other.
virtualbernie is offline  
Old 07-29-2011, 11:26 AM
  #13  
Super Member
 
lalaland's Avatar
 
Join Date: Jan 2010
Location: Yakima, WA
Posts: 2,439
Default

I've used both as well in my old and new machines and rarely had a problem but I stopped using metal bobbins in the top loading newer machines since part of the assembly is plastic and my repair guy told me the metal bobbins will wear the plastic out. Made sense to me so now I only use the metal bobbins if the casings are all metal as well.
lalaland is offline  
Old 07-29-2011, 11:32 AM
  #14  
Super Member
Thread Starter
 
Join Date: Jan 2010
Location: Outer Space
Posts: 9,319
Default

Originally Posted by amma
I am not sure, maybe with all of the prewounds available?
I prefer the metal and wish the new machines still used them :D:D:D

I hadn't thought of prewounds being a reason. I can see that.
Candace is offline  
Old 07-29-2011, 11:33 AM
  #15  
Super Member
Thread Starter
 
Join Date: Jan 2010
Location: Outer Space
Posts: 9,319
Default

Originally Posted by mom-6
I'm guessing that part of the reason is that the plastic bobbins are much more readily available in places like Wal-Mart which would be where a person would most likely go first to find replacement bobbins.

Even as an experienced seamstress I did not initially recognize the differences between the various bobbins and attempted to use wrong ones on one of my machines and did not realize that was part of the cause of the birdnests I experienced with it. Need to go back and figure out which bobbin really was meant for that machine and see if that will make it work right. Also need a bobbin cover for it. The random piece of clear plastic does not substitute very well there either.
Any place I go, Joannes, Walmart etc. carries both.
Candace is offline  
Old 07-29-2011, 11:34 AM
  #16  
Super Member
Thread Starter
 
Join Date: Jan 2010
Location: Outer Space
Posts: 9,319
Default

I find this thread curious as I've been told by vintage machine folks that the plastic bobbins are a no-no!
Candace is offline  
Old 07-29-2011, 12:23 PM
  #17  
Super Member
 
lalaland's Avatar
 
Join Date: Jan 2010
Location: Yakima, WA
Posts: 2,439
Default

Originally Posted by Candace
I find this thread curious as I've been told by vintage machine folks that the plastic bobbins are a no-no!
That may be because some of the plastic ones are shaped differently and this can cause them to "jump around" in the casing which could lead to thread jamming which can affect the tension and/or the timing if not caught in time. Also, the plastic bobbins do wear down in the metal casing eventually and that can also cause a problem. I think a lot of the time we say NO because that's the way it's always been, but that doesn't mean that's the way it has to stay.
lalaland is offline  
Old 07-29-2011, 12:25 PM
  #18  
Super Member
 
QultingaddictUK's Avatar
 
Join Date: Jan 2011
Location: North Wales UK
Posts: 2,028
Default

Originally Posted by virtualbernie
Originally Posted by Coyote Quilts
Knowledge? They probably don't know, don't understand and most importantly don't care. :)
I agree!
Ditto, it's obvious that the older machines are setup to use the heavier metal bobbins as plastic ones weren't made when you were in action, duh!
QultingaddictUK is offline  
Old 07-29-2011, 12:43 PM
  #19  
Super Member
 
katyquilter's Avatar
 
Join Date: Jun 2010
Location: Midwest
Posts: 1,370
Default

I'm about to try a plastic bobbin in my 99K which I recently purchased at a thrift store. It came with one metal bobbin and I bought the metal 66 bobbins which should work. they fit but do not work - the machine refuses to sew, it's as if the bobbin is just a hair too tight. So someone suggested plastic. I'm going to have to get some to try soon unless someone has a better suggestion.
katyquilter is offline  
Old 07-29-2011, 12:49 PM
  #20  
Super Member
 
lalaland's Avatar
 
Join Date: Jan 2010
Location: Yakima, WA
Posts: 2,439
Default

Originally Posted by katyquilter
I'm about to try a plastic bobbin in my 99K which I recently purchased at a thrift store. It came with one metal bobbin and I bought the metal 66 bobbins which should work. they fit but do not work - the machine refuses to sew, it's as if the bobbin is just a hair too tight. So someone suggested plastic. I'm going to have to get some to try soon unless someone has a better suggestion.
Go for it!
lalaland is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
coffeebreak
Main
31
08-15-2021 04:46 PM
stitchengramie
Main
11
10-09-2012 06:56 AM
MarLeClair
Main
19
08-24-2012 10:14 AM
GirlieWhirlie
Main
6
10-15-2011 08:56 AM
bri1977
Main
16
08-15-2011 10:46 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter