Dressmaker SAMB-2
2 Attachment(s)
I need help with a dressmaker on threading it. I dont know if something is wrong or if it is just me.
[ATTACH=CONFIG]430775[/ATTACH][ATTACH=CONFIG]430776[/ATTACH] |
do not know about dressmaker. just wanted to say nice machine. i have a singer 9117 it took me 2 weeks to search all about how to thread which way needle goes in. where abouts how to change belt. was at my witts end finally found all i needed. singerco.com and some other site do not know right off hand . issmac? someone will know about your machine.have fun with her after you figure her out....:)
|
i can't see your thread. Here is a generic manual. http://www.dontai.com/wp/images/imperial-535-manual.pdf
That machine should have the thread run from the spool through the thread guides, down around the tension catching the spring, up through the take up lever and back down through thread guides to the needle. The needle should be put in with the flat side toward the machine and the needle threads from left to right. Pretty simple. |
Mellisa,
A suggestion about pictures. Close the curtains behind the machine, the background light is affecting your cameras light sensor. Or, turn on the flash so it lights up the foreground. Those pics are just too dark to be of any use. As for the threading, Miriam is right. Joe |
Very nice machine, I can not see your thread.
|
Is that the thread hanging down off of the right of the tension dial?
|
Originally Posted by mlmack
(Post 6240776)
Is that the thread hanging down off of the right of the tension dial?
|
All times are GMT -8. The time now is 09:55 PM. |