Dianna, I posted 3 of Skip's (Glenn's) tutorials on my blog....the link is in my signature. :) He's absolutely awesome about helping out via PM or emails too! (One of my heroes!)

I'm going to have to try the shellac. I have a treadle that desperately needs refinishing.

Ladys I would suggest you read this before buying anything.

http://www.finewoodworking.com/pages/w00060.asp

He does a good job explaining the different product for the final finish.

I have a life time refinishing antique wood item's and will NOT use shellac. It's a base coat, not intened as a top coating ( finish) it need a coat of varnish or lacquer over the top of it .....

why would you replace a finish that failed with the same product ?

Look at any piece of furniture made over 30 yrs ago, coffe cup rings and starting to flake off or lift giving a rough to touch feel..

Those of you that have a home built say in the last 15/20 yrs and have wood cabinets, look at those, that finish is lacquer.

on mine Iuse a product called chemguard II made by chemcraft, check out there web site, chemguard II is a semi Catalyzed lacquer, giving an option to add more catalyst if wanted

you will go to a store and find varnish ect priced at 8 $ or so a quart, but lacquer will be 20 $ aquart, there is a reason for this. we buy this by the 5 gal butcket @ $480. My and I have used this for well over 10 yrs now with no failures, this has been building cabinet for these new mini mansion's during the housing boom.

after you read that the link above on shellac , you will find it is no safer than any other product out there, you can get shellac flake, but you will add the chemcails to that so that you can use it...those chem's are not going to leave once dry, if they did the shellac will fall off.

This lacquer is spendy but worth every penny, on a above 60 degree day , sprayed or bushed it will dry in about 15 minutes, so it can be recoated, in maybe 30 minutes it can be sanded smooth, then fine ( wet sanding ) sanded and ready to go.

these picture are of my cabinet , I bought it looking about as shown 20 yrs ago, for the last 5/6 month I have done nothing but restore treadles, so it was time to redo the top of this one, I sent a total of 5 1/2 hrs.

I use a utily knife blade/ razor knife to scrap off the old finish, it's faster than sanding and leave a nice smooth finish, then hand sand with the gain.. one brush coat, then another coat. I brush to get the thickness, spraying is to thin and I was in a hurry...again it dry's in minutes..

not saying this cabinet is good, but it's now smooth it cures as hard as a rock overnight , I have no problem laying my tools on these cabinets when doing the work on the heads,,, you would die, if you saw my ol hammer and screw driver laying on one LOL.. only thing I know that is harder is fiberglass resien thats another story..

before kind of

http://i922.photobucket.com/albums/a...7/100_8880.jpg

after.. it was evening so there are a bit dark, remember this took one afternoon and will out last me and my kid, The whitish on top is sanding dust

http://i922.photobucket.com/albums/a...7/100_8883.jpg

http://i922.photobucket.com/albums/a...7/100_8888.jpg

This is the same cabinet it's necchi who know's what they use for a finish, I just hop is not from those jo jo cats, they use for making coffee

here I did nothing more than scrape off the top coat, leaving the under coat, not sure what you can see here, most all furiture is done in coats using a different product as a top coating... at the time, now we have a little more advance products than 40 to 50 yrs ago... this area was no where near as bad as the top, but still flaking away or lifting, to the touch it felt much sand paper, so top coat removed, color sanded ( wet sanding ) and it's as good as the top .

this is sanded with 800 grit wet/ dry paper ( black paper) that takes it to a stain look, if you want a hi gloss, go to a 1200 then 2000 grit paper, which you can find at a auto paint store, most building supply's only carry 600 to 800



http://i922.photobucket.com/albums/a...7/100_8881.jpg