Help! I need a 1481203 Kenmore Stitch Width Lock
 

Does anyone have a junk or xtra parts drawer you can look for a Singer Kenmore 14812040 part "Stitch Width Lock" In the manual it looks like a small knob that controls/locks the stitch length in. I bought the machine on CL, the guy said it really worked good. He brought it out of the house, then asked if I wanted to go into the house and try it out. He just freaked me out, no way did I want to go into his house. The machine only cost $20 so I wasn't going to take the chance and go into this creepy guys house. I may be old, but not dumb. Back to the subject. If anyone has one in/on any spare part sewing machine would you be willing to sell it to me. I've called Sears, nobody could help me. I found the name of the part on page 2 of the manual, but no part number. I ordered one on eBay, but it was the wrong part although the seller called it a "Stitch Width Control Knob & Assy" it was not the part I needed. Again, I need a "Stitch Width Lock", I have reseached every resource I can think of, worked on it all day. I appreciate any help I can get.:thumbup: Thanks Much

It might help if you post pics of the machine, a photo of the missing piece, and the full model # of the Kenmore. There's a chance someone has a "donor" for you to transplant from. The old Kenmores are hardy machines and we have some collectors here.

We're not likely to know which Kenmore you have just from the model number. The "148" is the source code. It refers to the manufacturer of the machine. I don't remember who 148 is though. The numbers after that refer to the specific machine and features.
Monroe's advice is right on. A few pictures will go a long way toward helping you find your part.
Rodney

The 1203 is in the same series as the 1217! It is threaded to turn in and out. I unscrewed it to as far out as it goes and it poked out about half an inch without showing screw threads.
http://i169.photobucket.com/albums/u...pso6iilbnv.jpg

I would love to see pictures of the machine jmabby. Is it just a knob you are missing or are there parts involved inside that you need? I can look in my spare parts bin and see if I know what I am looking for.

The 148 series machines were manufactured by Soryu. I only have one 148 machine (or perhaps two), but I believe the width regulating lever is spring-loaded with the missing knob being a limiter. Is that correct?

Kenmore knobs can be found on eBay from those who've parted out their machines; such knobs can be an expensive solution (these sellers appear to charge as much as they can/dare), although if the machine is important to you, it would be the best route. Since your machine was only $20 (possibly less than a replacement vintage knob), you might do better to wait and buy another Kenmore machine for a similar price or less. I've been able to find CL Kenmores for free. One of my favorite Kenmores was about $6 from a thrift store, in great shape.

I have to agree with KRA, unless this particular machine has a special value to you, the part could end up doubling the price you have already paid.