Help Smoking Featherweight Motor
 

Help the motor is smoking a lot. I just bought this 1937 featherweight. It was on Craigslist so there is no returning it. I paid $60. I've never done anything like this but I would like to fix it myself. Stop laughing. I'm serious. Awhile ago I read this blog on how to rewire a potted motor. It looks difficult. I'm not looking to rewire it. Right now I just want to open the motor to see if gunk and oil are the problem. If so I would like to clean the motor. So is it possible to clean a motor without cutting the wires? Also one of the screw caps to the brushes is broken. The slot for the screwdriver is gone, how do I unscrew it? The big question I have is should I leave this to the professionals? Money is tight. So it will be awhile before I can afford to take it to a sewing machine guy. I'm not sure it is worth spending any money on it. Ugh I wish I had run it long enough to see that it smoked before I bought it. Any help would be great! Thank you!

Here's the link to the blog

http://vssmb.blogspot.com/2011/12/ho...rt-1-wire.html

PS I don't have a way to post any pictures

QN,

Sew-Classic has replacement brush caps, springs and brushes for the FW motors. Take the caps off, since it's already broken just carefully work it out with a sharp object. Use a q-tip with alcohol to clean the internal part of the brush tube and the armature as well as the brushes. More than likely the motor has been over lubed.

If you get it cleaned it should quit smoking.

Joe

Joe is right. If you have a dremmel tool you can carefully cut a slot in the brush cap so you can use a screw driver. If you don't want to do that, you can try digging it out as Joe said, but be very careful of the finish around the cap. Or you can take it to a local car mechanic and see if they will use a screw tap to take it out for you.

What kind of alcohol do I use to clean it?

Also what kind of belt is best?

I use denatured alcohol. It has less water in it and is a better solvent.

Joe

If you know a good carpenter or mechanic they have a tool to remove the screw driver. My husband has done this many times. If you open anything first take photos along the way for reference to put everything back. Use one of those magnetic tins for pins and keep near for the screws and any little pins. If you don't have a manual for the machine see if you can find it on the internet. If you know where the smoke was coming from look into that area and see if there are any hot marks. Take a photo of it. Some one on line may be able to tell you the problem. it will be worth the money. Can you take a photo and text it to a friends email then have them post for you? My sons do that often.

I like the old fashioned black ones. I've found that contrary to the add hype the amber cogged belts slip more and don't last near as long as the black ones.

Joe

Bourbon works for me.

Thanks for all the answers. You all are great! Here's one more. Is it possible to work on the motor without cutting and re attaching the wires?