Machine I'm trying to identify
2 Attachment(s)
I would like to know what model this machine. The no. AB260403 says it is a 99, but doesn't have the 99 badge. Made in 1926. I don't have electrial plug and I think I see a place for it. And I'm missing the knee thing that goes in the base. If I knew the model, maybe I could tell exactly what I need. Any help would be appreciated. Bobbie
|
Can you give us the serial number from that little brass plate under the medallion?
|
Not sure if it is a 66 or a 99. 99 is the 3/4 version. I would guess a 99.
|
Originally Posted by Stitchnripper
(Post 6336270)
Can you give us the serial number from that little brass plate under the medallion?
|
Yes, its AB 260403. They say its a 99.
|
Sorry, I double posted this. My DH came in and asked a question. I lost my thought.
|
Thanks Steve, it does appear to be a 99. Just isn't marked. I looked it up on google and found out what I needed.
|
The electric cord that went with it would have two female ends that fit over the pegs in those two holes in the metal cover on the base behind the machine. My husband rewired the cord for me. He used what he had on hand- so I have a white cord now!
http://i31.photobucket.com/albums/c3...psc2cfbb82.jpg The ends are very hard to find - so if you don't have them you may want to rewire it - the you could wire for a foot control if you wanted to bypass the knee control. The bars can be found on ebay - you need the one with the round female end (not the flat male end) they are harder to find and usually cost $30-$50. |
Thanks for the info and the pic!
|
Originally Posted by SteveH
(Post 6336272)
Not sure if it is a 66 or a 99. 99 is the 3/4 version. I would guess a 99.
Originally Posted by grannysewer
(Post 6336307)
Thanks Steve, it does appear to be a 99. Just isn't marked. I looked it up on google and found out what I needed.
|
All times are GMT -8. The time now is 07:10 PM. |