|
Originally Posted by Linda2
(Post 6842330)
That tension is just like the Touch and Sew tensions go in the Singerco.com site and look up a Singer 756. That may help. Google Singer replacement parts and it will bring you to the machine lists.
Welcome to the QB. You are so very right about the T&S machines. I've got one, but had completely forgotten about it. I'll see what I can find in the Singer site. Joe |
http://tandtrepair.com/700TS.html#
try this. if you look to the r side, there are other singer models. |
email on the way. DH has a parts list for the 500 series machines - it does have an expanded diagram of the tension.
it's for the 518, 538, 514, 534, 513, 533 - so though it's for the 500 Series, it's NOT for the 500A |
wilburness,
Thanks, if I only had the $$$ to order it ... :( Joe |
Originally Posted by Macybaby
(Post 6842493)
email on the way. DH has a parts list for the 500 series machines - it does have an expanded diagram of the tension.
it's for the 518, 538, 514, 534, 513, 533 - so though it's for the 500 Series, it's NOT for the 500A The top tension exploded view in page 4 is for the 513 type, not the 534. I've got that exact parts book in hard copy. Joe |
well, it was the same on the 534 that my husband took apart and put back together.
|
http://tandtrepair.com/Schematics/534andOthers.pdf
is this the schematics you need |
That is what Joe already has - but if you look down at the parts list, the 533 and 534 are listed for almost all the same ones, though the 533 has a "tension release spring" and maybe one other part that isn't listed as used for the 534.
|
Need Top Tension Exploded View.....
Here ya go. http://www.tandtrepair.com/Schematics/534andOthers.pdf
Sorry, some of the posts were not here when I reviewed the request. Did not mean to duplicate |
Well, here we go again. This stupid computer is refusing to open .pdf files. Gonna do a shut down restart in a minute and try again.
Cathy, the diagram for the 513 is similar as most tensions are similar. But the one mounted on the top cover has additional parts so I wanted an exact exploded drawing for that. I found one in a parts manual for my Singer T&S 778. So I'm good for the exploded drawing part. What I need now is adjustment specs, if there ever was any. But I think I can fake it after I get the disks cleaned and reassembled. Also, I have the link to Singers parent page for the industrial sewing machine service manuals. Does anyone have the link to the parent page for the Domestic machine service manuals? I used to have it but lost it in a hard drive failure. And for the life of me I cannot dig my way through that Singer site enough to find it again. Joe |
| All times are GMT -8. The time now is 08:18 AM. |