Quiltingboard Forums

Quiltingboard Forums (https://www.quiltingboard.com/)
-   For Vintage & Antique Machine Enthusiasts (https://www.quiltingboard.com/vintage-antique-machine-enthusiasts-f22/)
-   -   A new batch just arrived (https://www.quiltingboard.com/vintage-antique-machine-enthusiasts-f22/new-batch-just-arrived-t315450.html)

JoeJr 05-24-2021 03:41 PM

A new batch just arrived
 
3 Attachment(s)
My sister in Minneapolis, who enables my affliction, picked up all these machines for me, along with all the extras, for a total of $60. How could I pass it up??

There's a violin (or is it fiddle??https://cdn.quiltingboard.com/images/smilies/wink.png) base Singer up at the top, I know nothing about these. Five 66 red eyes, two 27s, a couple of old White VS machines, a Kenmore 117.959 (I have an empty Kenmore table), and a couple of newer machines.

I don't know what 95% of the accessories are for, but I guess I'll learn, once I remove the layers of rust.

I may be busy for a while now!

quiltedsunshine 05-24-2021 04:46 PM

WOW! That's fun! I would have picked them up, too!

OurWorkbench 05-24-2021 07:27 PM

WOW, what a great haul.

Look at all those back clamp attachments.

Even the White attachments. And a Famous buttonholer.

Most of the attachments should be shown in the manual.

Janey - Neat people never make the exciting discoveries I do.
Not affiliated with off-site link(s)


thepolyparrot 05-24-2021 07:29 PM

What a fun haul! Hope you have a great time with them. 😊

bkay 05-25-2021 04:09 AM

The touch and sew may be already past repair. The gears are at the age they disintegrate when the machine is used. That said, mine still works, but it has been used very lightly and always stored in a closet in the house.

Good luck with the others. It looks like a great haul.

bkay

Hooligan 05-25-2021 04:22 AM

Nice find (and what a good sis) Joe https://cdn.quiltingboard.com/images...es/thumbup.png keep ya busy for a bit.

JoeJr 05-25-2021 06:07 AM


Originally Posted by OurWorkbench (Post 8486271)
WOW, what a great haul.

Look at all those back clamp attachments.

Even the White attachments. And a Famous buttonholer.

Most of the attachments should be shown in the manual.

Janey - Neat people never make the exciting discoveries I do.
Not affiliated with off-site link(s)


The Famous buttonholer is a substantial piece of machinery, it must weigh at least 2lbs. I'm no metal expert, but the main housing appears to have been machined from a block of metal. It's actually a beautiful piece.

juliasb 05-26-2021 05:55 AM

You definitely have your work cut out with this new haul! I have to ask how long do you think it will take to overhaul all these priceless machines. Then what will you do with all of them once they are restored? Do you keep them or sell them. I personally would be hard pressed to sell any of them as I tend to be a collector. Have loads of fun tinkering.

JoeJr 05-26-2021 11:20 AM


Originally Posted by juliasb (Post 8486592)
You definitely have your work cut out with this new haul! I have to ask how long do you think it will take to overhaul all these priceless machines. Then what will you do with all of them once they are restored? Do you keep them or sell them. I personally would be hard pressed to sell any of them as I tend to be a collector. Have loads of fun tinkering.

I think it will take months. Generally, I clean the machine as much as I can, test it, then make a base for it to sit in. In this situation I had actually been looking for some beat up 66s with the 9 spoke hand wheels, to use on other machines for hand cranks. I can get aftermarket hand wheels, for about $19, but they arenít as high quality and I just prefer the idea of having a genuine Singer hand wheel. When I saw this lot of machines for the price they were, I couldnít pass it up, and it gave me an excuse to drive almost 10hrs to visit my sister.

What will I do with these machines? I have a local sewing machine friend who is more connected with other sewing machine people, so I will check with her on anyone who might be interested (for not much money probably) in the Singer fiddle base and the two White vibrating shuttle machines; I think I have the shuttles for all three of these machines, and attachments for the Whites, which should make it easier. I just donít know anything about these particular machines. I wonít clean or service any of them until I know one way or the other.

The Touch & Sew I will check for intact gears, if they are intact then I will service it and sell it on craigslist for $5; if not then I will try to scavenge parts from it and recycle the rest. The Kenmore 117.959 I will clean up and service. Iíve had three other 117 series Kenmores, and I like them, and right now I have an empty Kenmore table in which I can store this one, or Iíll make a case for it and sell it. The blue/white White Iíve already tested, but not serviced, and it sews just fine, although something was supposed to be wrong with it, just not sure what the problem was supposed to be.

The 27s, Iím not sure. They are treadle only, no rail/boss to handle a motor or hand crank. I do have a really cool motor mount for Singers which clamps to the back using the hole at the back top of the pillar, so I may keep those. If nothing else I will clean them up and test sew them by hand. Apparently the 27 with the Persian decals is not too common.

The 66s, I think three of them have good enough decals to clean up and service and then turn into hand cranks after I make some bases for them, and then try to sell. The other two will be donor machines as necessary, and if I have enough parts I will hopefully make them work and make bases for them with hand cranks, they just wonít be as pretty.

The more time I put into a machine, the harder it is to part with it, but I donít have a lot of storage room so I have to say goodbye to some of them. When I try to sell, I am really only looking to get back actual $$ I have in them, my labor does not add any value in terms of sale price. I only sell on craigslist, I am not on facebook. This is probably more than you wanted to know, but there it is!

leonf 05-27-2021 06:29 AM

somehow when you said you had reached your limit a while back, I thought you were deluding your self.

Way cool about the motor mount. those beasties are RARE "I do have a really cool motor mount for Singers which clamps to the back using the hole at the back top of the pillar"


All times are GMT -8. The time now is 04:58 PM.



SEO by vBSEO ©2011, Crawlability, Inc.