Originally Posted by sharon b
Be glad that you had enough sense not to trust this person :lol: Imagine what he is doing to the machines for people that don't realize he doesn't know what he is doing :shock:
|
Wow, Charlee. I pray this guy is not in Winston Salem, NC. I do not have enough knowlege to know if they know what they are talking about. Kinda of scary since I need to take mine in to be cleaned and adjusted soon.
|
I've been blessed in that, where I've had my machines serviced, they know what they are doing. Our LQS sells Bernina machines, but do service other brands, and I've never been disappointed.
|
We have a guy in a very small shop here in Bakersfield, not far from where we live. He was recommended to us, and my mom and my DH have both had machines serviced there, and finished in 2 days and inexpensive. Great work. The big shop where a lot of quilters go takes weeks to get the work done, as so very busy. We'll stick with the small guy. Fajardo Sewing Machines is the name if you are near here.
|
I once took my old machine to a huskavarna dealer for a "tune up." The guy called and said my machine was a piece of junk and that he would "go ahead and just throw it away for you!" I said ABSOLUTELY NOT! I still sew on it to this day (although it does tie knots in my thread sometimes...only sometimes)
|
Originally Posted by RatherB Quilting
I once took my old machine to a huskavarna dealer for a "tune up." The guy called and said my machine was a piece of junk and that he would "go ahead and just throw it away for you!" I said ABSOLUTELY NOT! I still sew on it to this day (although it does tie knots in my thread sometimes...only sometimes)
|
wow that is a scary thought, him running a shop with no knowledge of what to do. God bless. Penny
|
that is awful
|
marsye,
What does Banned mean? And where is the picture referred to in CarrieAnne's post? |
Wow...old post!
Kitsy, "banned" means exactly that... for whatever reason, (usually not following rules) a person gets banned and is not allowed to be a member here. I believe the photo in Carrie Ann's post are the instructions for lubing a motor. |
I read all the way through this and didn't realise it was from last year until reaching the end.
Charlee, if you are in the right mood and you end up talking to someone who thinks you are dense, whereas it is them who knows nothing, have some fun and act really really thick, completely useless and girly, and say you might come back after you've discussed it with your husband. At least you might have a bit of a laugh about it when you get home. |
It's funny...this guy STILL tries to get his hands on my machines! He rents from us once in awhile, and I took him over to the apartment one day and showed him my machines...he was darned near drooling....and telling me how much I paid for the machines...totally wrong! I *think* he finally grasps the concept that a "Boye 18" does NOT mean that the needle size is an 18! (I showed him needles too! LOL!)
He did ask me when I was going to bring the machines in to be serviced and timed!! I told him that I handle that stuff myself and his jaw dropped! :D That does sound like fun tho Muv...maybe I'll go find another OSMG to play with!! ~grin~ |
I would go back to the shop and get the numbers off the machine. I would look it up and go back and stick it up His nose. Then I would walk out and tell Him He would never touch a machine of mine for fear He would not know what to do. That is what I would do. How does He stay in business not knowing better that that. I'm not that up on all this but I do know not to put oil in a potted motor.Joy
|
What is a 'potted motor'?
|
Yup.. I'd be getting a little nutty with the guy.. Would be very polite, and let the guy know he needs to lear more about sewing machines before hescrews them up for good.. Then you run into a problem if you are in rural area on who to take the machine to.. Think a farmer might be better at working on a sewing machine..
|
I read it thru before I found out it was old, too.
However, it scares me because I have a machine in the shop now. And I wouldn't know if I got suckered or not. What do I need to look for when I pick it up (besides scotch tape?! ) |
Originally Posted by bearisgray
(Post 5349412)
What is a 'potted motor'?
http://www.flickr.com/photos/brige66/5029822207/ |
Originally Posted by AshleyR
(Post 5349436)
I read it thru before I found out it was old, too.
However, it scares me because I have a machine in the shop now. And I wouldn't know if I got suckered or not. What do I need to look for when I pick it up (besides scotch tape?! ) |
charlee, There's a shop in Eugene, the guy has been there 37 yrs under his owner ship...
simple little things we forget .. Last week, I ask hime about the springs in a foot pedal,, he looked lost and STARTED to say they don't have springs, Now I also had with me an old machine. He knows I'm always after old time stuff.. Upon see the look, I told him about that shop way back when , and the guy always had boxes of those springs, THEN, He remember the springs... he laughed and talked of the boxes he tossed out, He did dig a come up with about 6 springs... I knew these would be hard to get , any of you going to these shop , should ask and buy what ever you can get. This shop also has used machines, most are newer type, He did have a old dressmaker.. priced at $298 / 89 ? every thing else was just over 300 and all white box machines |
Originally Posted by barri1
(Post 5349430)
Yup.. I'd be getting a little nutty with the guy.. Would be very polite, and let the guy know he needs to lear more about sewing machines before hescrews them up for good.. Then you run into a problem if you are in rural area on who to take the machine to.. Think a farmer might be better at working on a sewing machine..
Elaine |
Originally Posted by Charlee
(Post 5349493)
The machine is gear driven by a motor that's fully enclosed on the back of the machine by a little "pot"...
http://www.flickr.com/photos/brige66/5029822207/ |
Originally Posted by Charlee
(Post 5349506)
Check to see that it's been repaired as you requested. Take thread, and a scrap to test it while you're still at the shop. If you took it in for general service, check to see that it's been cleaned, look for "oil shine" on exposed mechanical parts, make sure the bobbin area has been cleaned and free of lint and lint dust.
|
My sisters best friend is named Dottie and could be your twin. The similar looks are amazing. Dottie has your personality too. Her friends call her "Dottie the Chiwawa" because she won't let up if something is bothering her. She's a little, small framed barker! LOL!
|
Originally Posted by Charlee
(Post 5349493)
The machine is gear driven by a motor that's fully enclosed on the back of the machine by a little "pot"...
http://www.flickr.com/photos/brige66/5029822207/ And, the quote says there are only 2 machines that have a potted motor. That can't be true. I now have a Singer 101 and it has the potted motor. I know it's been hard trying to find much information about the 101s. I haven't printed out the owner's manual for it yet but I will have to because I need to know about putting the grease in it. You just can't trust everything you see on the internet either. |
I had this happen one time with my computer. I was telling the men about it and they looked at me and said this is a pretty old computer and cannot have all that on it because they did not do that years agod. I told them again that it had crashed and I did not want to buy a new computer because I could not get all the stuff I wanted on it without spending a fortune. The young man (looked about 14 lol) told me it was not worth saving and I did not understand. Well that did it. With hacd on hip I informed him that I knew all about this machine and it was well worth fixing because my son said so and I am sure he knows all about it since he built it for me. I also mentioned that he had been a crytological tech in the navy and now worked for a company that installed all the computer equipment in navy ships and the only reason you are even touching my puter is because I cannot get it to my son in Virginia Beach.
Yes his attitude changed. lol |
Originally Posted by nanna-up-north
(Post 5350064)
And, the quote says there are only 2 machines that have a potted motor. That can't be true. I now have a Singer 101 and it has the potted motor. I know it's been hard trying to find much information about the 101s. I haven't printed out the owner's manual for it yet but I will have to because I need to know about putting the grease in it. You just can't trust everything you see on the internet either. |
In Christmas Valley a fellow was telling me his family had a singer dealership. When a black machine was traded in, no matter how nice it was, they used to take a big hammer and destroy them to get them out of the market place so they could sell the new machines. I was physically ill instantly. I like to fell over in a faint. I am a singer-aholic and have several.
|
All times are GMT -8. The time now is 03:58 AM. |