Singer 201 tension
My tension on my 201 gets out of whack while I am sewing. Could it be that the tension needs to be changed?
The number knob is really loose. Any help from any Singer repairperson would be appreciated. Otherwise, when the tension is right, it has a beautiful stitch. Thanks for the help. |
granny64,
I had problems with the top tension changing on our 401A while we were sewing with it. The tension assembly is very similar to the 201s so what I did for ours should work with yours too. The adjusting nob on ours was too loose and would just vibrate looser as we sewed. First go here: { http://www.tfsr.org/publications/tec...machine_manual } and study how the tensions work. There is detailed instructions on how to R&R, repair and adjust them. That said all I had to do with ours was spread the fingers of the split shaft apart to tighten up the fit of the numbered dial. That way it doesn't move unless we adjust it. To do that you have to take it apart, that's why the TFSR site. Joe |
Originally Posted by J Miller
(Post 5559807)
That said all I had to do with ours was spread the fingers of the split shaft apart to tighten up the fit of the numbered dial. That way it doesn't move unless we adjust it.
To do that you have to take it apart, that's why the TFSR site. Joe |
If you can tighten it down until the thread breaks when sewing, there is room for adjustment. It's rare that the spring goes bad but not a big deal to replace...maybe 6.00 dollars at the most.
|
Thanks, Joe. I will try your suggestion.
|
Thanks, DanofNJ.
|
Thanks, cabbagepatchkid.
|
All times are GMT -8. The time now is 08:09 PM. |