Singer 319w zig zag is not zig zagging
Hi everyone, excuse me if this has been discussed, I tried to find out if it had but was not able to.
But I have recently gotten into sewing, mostly camping gear. But I got a singer 319 w. For some reason the zig zag stitches don't work. I have adjusted the stitch width and stuff. But what it seems like is that when I select the stitch I want, the part that is supposed to ride along the disc as it sounds does not follow the up and down of the discs. It only hits the tops of the discs which causes it to move just slightly instead of within the full range that it should. Is there a spring somewhere that drives that? Or something I am just missing? Any help would be appreciated. |
Welcome, Tank.
Something needs to be adjusted. I know on my Japanese "Miracle" I had to adjust a screw to get it to follow the cams correctly. I really haven't sewn much with my 319 so don't know how the adjustment is made on them. Perhaps https://www.quiltingboard.com/pictur...t162425-7.html might have something about adjusting this machine. Janey - Neat people never make the exciting discoveries I do. |
Is there dried up oil in there somewhere? Rust? Before I adjust anything I make sure it moves freely.
|
I don't have one close, but I will echo miriam. Look at the piece that should follow the cam and oil the pivot points or slides and bits back to the controller if you can get that far.
|
It could be a part missing on the ZZ controller or a dried oil stuck piece anywhere on the machine that ZZ’s. Does it move at all? Or does it move but not ZZ?
|
yes, does it sew straight stitches?
|
I never adjust anything on a machine until I’m pretty sure it is adequately cleaned and oiled. If it has set a long time that oil can be pretty dry. It only takes a tiny bit of dried up oil to foul up the machines. There can be a smidge of rust somewhere. Yes, make sure it does a straight stitch before you worry about ZZ stitches.
|
if you are on facebook, there is a group specific to this machine - they will be able to help you. Singer Swing Needle Sewing Machines - Models 206, 306, 319, and 320 is the name of the group.
|
My Singer 319, when I got it, came with the wrong needle and I started sewing with it straight and then zig zag. And the 15x1 needle bent, the thread tangled and the SINGER 319 stopped making zig zag and decorative stitches. But if I move the needle column lever, it goes to the 3 positions (left, center and right). And when I activate the CAMS keyboard, the needle column moves after placing the point at 3 to 5 mm. But the column with the motor running does not move from one side to the other to make the decorative stitches. The SINGER 319K only sews straight and perfectly like this, but does not work with decorative stitches. I live in Brazil and I don't know where I could take it apart to fix it.
|
Originally Posted by Sandim
(Post 8644685)
My Singer 319, when I got it, came with the wrong needle and I started sewing with it straight and then zig zag.
Can you manually swing the needle (by just pushing it back and forth)? bkay |
All times are GMT -8. The time now is 05:38 PM. |