Quiltingboard Forums

Quiltingboard Forums (https://www.quiltingboard.com/)
-   For Vintage & Antique Machine Enthusiasts (https://www.quiltingboard.com/vintage-antique-machine-enthusiasts-f22/)
-   -   Singer 347 (https://www.quiltingboard.com/vintage-antique-machine-enthusiasts-f22/singer-347-a-t212765.html)

crazy cat lady 02-02-2013 10:13 AM

Singer 347
 
I have a Singer 347 machine without attachments. The seller was nice to make a copy of the owners manual, though. "Tilly" is a light teal w/ darker teal front panel. I could pobably search ebay, but I wanted to get feedback from my QB friends too!

donnajean 02-02-2013 10:27 AM

I have a Singer 337 & used it from the 60's & it's he only machine I owned until I got my Viking Rose in 1966. I have never had it in for repair & still use it occassionally when sewing something heavy.

I just Googled Singer 337 & found this:
The Singer 337 appears to have been manufactured in Scotland for the 1964 and 1965 model years. The writer has seen two versions of it. One, like the one reviewed here, without a needle position selector, and one with the needle position selector. He does not know if they were two different models or just ’64 model and ’65 model differences. He has also seen two color variations, light blue like this one, and light green. The both seem to have the same greenish plastic top cover.

The 337 is a basic Zig-Zag machine, with a drop in plastic bobbin. The top arm cover is plastic, the name plate is plastic, the tension dial, but not the mechanism, is plastic. Every thing else is metal. All gears are steel. The machine is technically a horizontal rotary oscillating hook type which tends to be very reliable. The lack of frills also lends itself to reliability. Since it has dual tension slots and an oscillating hook, it should only be a matter of adding a second spool pin to use twin needles with it.

Slide Show of Singer 337 Images

There was a slightly more expensive companion model, the 338, that had interchangeable cams and thus a wider selection of stitch types. As far as the writer can determine the 337/338’s are very similar to the proceeding 327/328 which had an external motor, and the subsequent 347/348 which had a belt driven rotary hook. He was unable to find a Service Manual for the 337/338 but has one for the 347/348 and the only difference he can see is that the 337/338 has a walking bar driven oscillating hook, while the 347/348 has a cogged belt driven rotating hook, and a couple of nylon gears.

There are two main levers on the front. The vertical one controls the stitch length and forward/reverse. The stitch length can be varied from 7 per inch to 30 per inch; plus there is a setting for 6 stitches per inch basting, but it is locked and the lever can not be moved to reverse at that setting. Just below that lever is a switch for the light. And just above it is the Bobbin Winder control. The horizontal lever controls the Zig-Zag with from Zero, straight stitching, to 5, about a ¼ inch wide. On the model with the Needle Position selector that is just to the right of the Zig-Zag selector. There is, of course a knob to adjust Thread Tension. A foot controller for Motor Speed is the only other control on the machine.

It uses a standard 15×1 needle, plastic bobbins, a 15 watt bayonet light bulb, and sewing machine oil all of which were available at the local Wal-Mart. You also need a small tube of sewing machine grease for two gears in the top that the local Wal-Mart did not have.

crazy cat lady 02-07-2013 07:01 PM

Thanks so much for all he info! I knew Tilly was old, just wasn't sure of the year.


All times are GMT -8. The time now is 09:24 AM.