| oldsewnsew |
01-12-2014 10:37 PM |
I did find that my OSMG's method does indeed sort of work. But you need to be careful with the way I did it. Using a white cotton sock wrapped tightly around the finger tip, put a couple drops of alcohol, followed by a couple drops of Singer SM oil. Then rubbing as in Glenn's french polishing method. You can even rub pretty hard where there is yellowing, cracking. Do this a little, then add a couple more drops of oil, and rub some more. The alcohol seems to dissolve some of the old clear shellac finish and kind of reflow it, I think. You feel what's happening as you rub, and start to hear it squeak when you're through the rough clear coat. There will be a glazed, or milky look, and then once it's dried, polish it with a dry ankle part of the sock, and it will shine!! Add a couple more drops of oil and rub it on, then let it sit for awhile, come back and start over. What you have to be careful of, especially on an old National Windsor B I'm also cleaning up, is that if you get too much alcohol on the sock, or it hits the metal before the oil, is it can, silver a decal. So use more oil over the part of the sock you've been rubbing with. It was quicker than oil alone, but with risk.
I think Steve H gave me a tip that was "risky" but I don't remember if this was it. Getting old,...sigh
|
