Tri Flow Oil
 

I am trying to get old oil off the reverse mechanism of my Wizard SK3. A couple of people have recommended Tri Flow but when I go to the internet there seems to be several different kinds to choose from. Could someone point me to the right tri flow product for my sewing machine

Go to www.sew-classic.com. She is very knowledgeable too. :)

Blackberry,

Just order the Tri-FLow oil Sew-Classic sells. That's what most of us use.

Joe

Thanks Joe. I will do that.

same stuff. I just posted a link to the manufacturer in case you wanted to read about it.

My singer department in JoAnn's has changed their sewing machine oil from singer to TriFlow. You might find it there.

AzKAT

I got some at the bike shop - it was cheaper at sew-classic but I got it the same day

I've used contact cleaner. It's in a spray can, you can buy in the automotive section at walmart. Just point and shoot and all the goop is blasted away. Seriously the old gummy sticky oil just starts 'melting' off . I've only used it on the insides where it's gummy and yellow. So if you do go this way, test it first before really going gung ho. Then i just re oiled my machines. Metal on metal it works beautifully, metal on plastic you'd have to be careful because it does cool off the area being sprayed.

I'm always careful what I work around - my health is more valuable than what little time I might save with some kind of spray. Second you may harm the finish on the machine if the stuff comes in contact.