Quiltingboard Forums

Quiltingboard Forums (https://www.quiltingboard.com/)
-   For Vintage & Antique Machine Enthusiasts (https://www.quiltingboard.com/vintage-antique-machine-enthusiasts-f22/)
-   -   What type of spool pin for a Singer 201? (https://www.quiltingboard.com/vintage-antique-machine-enthusiasts-f22/what-type-spool-pin-singer-201-a-t236695.html)

cricket_iscute 12-14-2013 11:00 AM

What type of spool pin for a Singer 201?
 
I lost the spool pin to my Singer 201 and also don't have the manual. Could someone please tell me what type of a spool pin the machine takes? Is it the tap-in metal spool pin? I imagine Sew Classic would sell them?

Thanks,
Cricket

vmaniqui 12-14-2013 11:05 AM

is it a thread spool ? if it is maybe this will work .

miriam 12-14-2013 11:13 AM


Originally Posted by cricket_iscute (Post 6456336)
I lost the spool pin to my Singer 201 and also don't have the manual. Could someone please tell me what type of a spool pin the machine takes? Is it the tap-in metal spool pin? I imagine Sew Classic would sell them?

Thanks,
Cricket

Mine has a little plate that is AWOL that holds the pin. I wish I knew where to get one, too. Those seem to come up missing often. Unless someone is scrapping out their 201 it might be hard to get one. I will be interested to know what can be used for this machine, too. I have not tried to put anything in mine yet.

J Miller 12-14-2013 11:34 AM

If it has the plate I don't know for sure. If it doesn't have the plate it is a screw in spool peg, at least mine is.

Sew Classic has the threaded ones { http://www.shop.sew-classic.com/Spoo...d-SCSPF2AY.htm }

Joe

ArchaicArcane 12-16-2013 09:52 AM

I'm 98% sure I used a tap in when I needed one and had no plate... but yes, there should be a plate that it goes on to cover those 2 holes beside the spool pin hole.

purplefiend 12-16-2013 11:27 AM

I found an ebay auction with a picture that clearly shows the type plate is on top where the spool pin is, #5 picture.

http://www.ebay.com/itm/SINGER-201k-...item4179e31628

Boston Mom 07-26-2020 03:38 PM

Singer 201-2 Spool plate
 
Today is July 26, 2020. I am also in search of this part! I can't find a part number or even a photo of it. If anyone could help I would greatly appreciate it. Thanks so much!!!

OurWorkbench 07-26-2020 06:13 PM

If you are wanting the straight plate, I believe the part number is 45209. I think there were some others, too. There have been some discussions regarding the fact that there were some 201s that didn't have a plate. There is a blackside one that is pictured at http://wesewretro.com/2012/04/singer...ewing-machine/ Then there are a couple of videos that one doesn't have a plate and the other that does at https://www.youtube.com/watch?v=_h9wAGCIIrc and https://www.youtube.com/watch?v=9nLpvw2M40A

Janey - Neat people never make the exciting discoveries I do.
Not affiliated with off-site link(s)

BonnieJP 07-27-2020 03:48 AM

Central Michigan Sewing Supplies has 201 spool pin plates and two kinds of spool pins.

https://www.vintagesingerparts.com/s...=201+spool+pin

OurWorkbench 07-27-2020 04:51 AM

However, if you click the link - it is "Sold Out" https://www.vintagesingerparts.com/p...20344567627874

Janey - Neat people never make the exciting discoveries I do.
Not affiliated with off-site link(s)


All times are GMT -8. The time now is 06:07 AM.