Rot on Featherweight
09-30-2020, 06:57 AM
#3
Senior Member
Join Date: Apr 2020
Location: South of St Louis
Posts: 822
I have one aluminum body machine that had quite a bit of corrosion on the underside. I soaked paper towels in vinegar and laid them on the corrosion and let it sit, then wiped off most of the corrosion, I think I may have used a nylon brush as needed.
I would soak the tape/residue with a healthy coat of oil and let it sit.
I would soak the tape/residue with a healthy coat of oil and let it sit.
10-01-2020, 05:26 AM
#4
Junior Member
Join Date: Jan 2020
Location: Ontario
Posts: 299
If the chrome work is good and there is no seizures (main parts moving), then it won't be hard to clean the machine up. Cost is the question as we don't know what parts, etc. the machine needs other than a clean. Replace all wiring as a habit, then swap out parts as needed. Also check the light fitting as some need to be replaced due to age/use. Other than that, enjoy the machine 
10-01-2020, 05:47 AM
#5
Super Member
Join Date: Jun 2010
Location: Waterford Michigan
Posts: 7,241
Originally Posted by JoeJr
I have one aluminum body machine that had quite a bit of corrosion on the underside. I soaked paper towels in vinegar and laid them on the corrosion and let it sit, then wiped off most of the corrosion, I think I may have used a nylon brush as needed.
I would soak the tape/residue with a healthy coat of oil and let it sit.
I would soak the tape/residue with a healthy coat of oil and let it sit.
10-01-2020, 05:56 AM
#6
Super Member
Join Date: Dec 2010
Location: Portage, Michigan
Posts: 7,332
Go to our friend Google. There is so much information about how to clean and repair older machines, specifically a featherweight like yours. I have learned how to clean and oil my FW and even how to replace the belt on a treadle. Keep watching here and ask lots of questions. The photos help tremendously.
10-01-2020, 11:26 AM
#8
Senior Member
Join Date: Apr 2020
Location: South of St Louis
Posts: 822
Originally Posted by juliasb
I just learned something new for my FW that has a bit of corrasion on it. Thanks for the tip.
10-01-2020, 07:05 PM
#9
Member
Join Date: Jan 2012
Location: Oklahoma City
Posts: 7
There is a book written by Dave McCallum called "The Featherweight and I" that has all the information you will need to take care of and repair and clean your featherweight. It is a life saver. It was so successful he followed it up with videos he titled "Those Fantastic Featherweights." It is expensive because there are 45 videos covering most everything you will ever need to know. I wouldn't be without either one! Carol
