Go Back  Quiltingboard Forums > Main > For Vintage & Antique Machine Enthusiasts
Seeking Part for Cam Lid for Piedmont/New Home Model 672 >

Seeking Part for Cam Lid for Piedmont/New Home Model 672

Seeking Part for Cam Lid for Piedmont/New Home Model 672

Old 06-12-2018, 08:09 PM
  #1  
Member
Thread Starter
 
Join Date: Jun 2018
Posts: 2
Default Seeking Part for Cam Lid for Piedmont/New Home Model 672

Hello,
I am new to this forum. I acquired this older sewing machine. The cam lid/cover is missing a part that keeps it closed. I am not sure what the part looks like or what it is called so I do not know what to search for. Any suggestions for replacement parts or workarounds to keep the lid closed would be appreciated. I have attached a photo of the cam area so you can see what I am looking for.
Attached Thumbnails ba300679-7e42-4cd0-bfe7-3148399756b6.jpeg  
Sabrena55 is offline  
Old 06-13-2018, 03:41 AM
  #2  
Super Member
 
OurWorkbench's Avatar
 
Join Date: Mar 2015
Location: Denver, CO
Posts: 4,224
Default

Welcome.

I'm guessing that you do not have a manual. Maybe you could get one at http://www.sewusa.com/Sewing_Machine...w_Home_672.htm I have been working with a machine that uses cams and one has to move some knobs or levers to insert the cams. It looks to me that the "cam follower" is in the wrong position as indicated with the arrow.

[ATTACH=CONFIG]595904[/ATTACH]

Try moving some knobs and seeing if it moves. Have you tried removing the cam and does the lid stay closed?


You might check New Home sewing machine model 672 It is an older thread and don't know if she still has the machine.

Janey - Neat people never make the exciting discoveries I do.
Attached Thumbnails piedmont672camarea-arrow.jpg  
OurWorkbench is offline  
Old 06-14-2018, 09:32 PM
  #3  
Member
Thread Starter
 
Join Date: Jun 2018
Posts: 2
Default

Hello! Thank you for responding so quickly. I am I forgot to mention a friend gave a manual she found online. It is a pretty standard manual explaining how to oil the machine, thread the machine, change needles, adjust tensions for the bobbin case/thread/cams etc. Unforgently there isn’t any detailed instructions on what to look for when specific things do not work and how to fix them. When I got the machine the lid to the cam area was taped down pretty good. I cleaned all that off. Last night after reading your email I took the cover off the top and started turning the dials. Everything seemed to move like it should including the part you referenced. I found in the manual where it talks about turning the dials a certain way and the cam lid opens. So I moved dials according to the manual and the lid does not lock or unlock or make any indication it is doing that. The lever you were commenting on does move out of the way so the cam be removed when turning the dials per the manual. Any suggestions would be greatly appreciated. Thank you for sharing the conversation thread about the mscine like mine. I will reach out to them as well. The sewing machine seems to be working pretty well. I oiled it and got the tension set for a straight stitch. Sews really well. Even made a padded case for my Kindle Voyage to test it out. Just cannot figure out why the lid for the cam area will not lock/unlock. If you or anyone would me to include a picture of the page in the manual that talks about the lid opening let me. Thanks for all your help! Sabrena
Sabrena55 is offline  
Old 06-15-2018, 01:35 PM
  #4  
Super Member
 
Join Date: Oct 2011
Location: dallas tx.
Posts: 5,172
Default

I don't know, but, that lid doesn't look like it goes into that hole. Maybe it is just the camera, but it doesn't look like the same design. Barny
barny is offline  
Old 06-15-2018, 05:21 PM
  #5  
Super Member
 
OurWorkbench's Avatar
 
Join Date: Mar 2015
Location: Denver, CO
Posts: 4,224
Default

Glad that it is sewing well.

If you were in the Denver Colorado area, I would like to see if I could figure it out for you. Lacking that, I am going to guess, that it probably has something to do with the metal (silver colored) pieces on the right side of the cam lid and opening. For a work around, I would suggest loosening the screw at the yellow arrow, and see if you can rotate the piece - purple arrow - it is screwing into downward and toward the back of the machine.

[ATTACH=CONFIG]596017[/ATTACH]

Be careful, as one can never tell how long that screw is and what other parts are involved.

I watched https://www.youtube.com/watch?v=2MTzrVmG-n8 and saw how to open and close the cam door, but I couldn't see the probable parts that were involved.

You said "Last night after reading your email I took the cover off the top and started turning the dials. Everything seemed to move like it should including the part you referenced. I found in the manual where it talks about turning the dials a certain way and the cam lid opens." If you can move the piece that I indicated in the above picture, with the top on, and lid open, try moving the dials in the manual that open the lid slowly and see if anything moves.

Good luck.

Something just thought of - I'm thinking that if the piece moves as indicated above, you may not be able to close the lid if the other parts that allows it to open is in the way. I think that the silver piece with the red mark on it may release the lid. I know padlocks can be closed even if not on the opening numbers, but unsure if that would be true of this machine.

Janey - Neat people never make the exciting discoveries I do.
Attached Thumbnails piedmont672camarea2arrow.jpg  

Last edited by OurWorkbench; 06-15-2018 at 05:33 PM. Reason: additional thoughts
OurWorkbench is offline  
Old 06-15-2018, 06:02 PM
  #6  
Super Member
 
Join Date: Mar 2016
Posts: 2,807
Default

Maybe you have to take the cam out to have the lid close. That's just a thought I had while reading this, but is something I would try.

bkay
bkay is offline  
Old 06-15-2018, 06:07 PM
  #7  
Super Member
 
OurWorkbench's Avatar
 
Join Date: Mar 2015
Location: Denver, CO
Posts: 4,224
Default

Originally Posted by bkay View Post
Maybe you have to take the cam out to have the lid close. That's just a thought I had while reading this, but is something I would try.

bkay
I don't think I've seen a machine that does it that way. You put the cam in, close the lid and sew.

Watch the video - it is real short, but shows how to open and also how to "lock" the lid.

Actually, I haven't seen a machine with a "locking" cam lid in real person. I know that to change cams, there are specific ways to do it on some machines.



Janey - Neat people never make the exciting discoveries I do.

Last edited by OurWorkbench; 06-15-2018 at 06:10 PM.
OurWorkbench is offline  
Old 06-16-2018, 05:19 AM
  #8  
Super Member
 
Join Date: Mar 2016
Posts: 2,807
Default

Originally Posted by OurWorkbench View Post
I know that to change cams, there are specific ways to do it on some machines.

Janey - Neat people never make the exciting discoveries I do.
Yeah, even my 401 has certain settings to change the cams. I have to get the book out every time I change a cam, which is seldom, as almost all stitches are built in.

bkay
bkay is offline  
Old 06-16-2018, 06:25 AM
  #9  
Super Member
 
Join Date: Oct 2012
Posts: 1,132
Default

Originally Posted by Sabrena55 View Post
Hello,
I have attached a photo of the cam area so you can see what I am looking for.
Are you sure that this cam belongs to this machine?
elnan is offline  
Old 06-16-2018, 07:56 AM
  #10  
Super Member
 
Join Date: Apr 2015
Posts: 1,265
Default

Your cam has a white zero on it and a zig-zag symbol. Opposite the zig-zag symbol, there should be a hole in the cam. If you were able to lift the cam out of the machine, you should see a pin underneath that the hole is seated on. If you look at the YouTube video that OurWorkBench posted, you will see what I'm referring to. In that video, his white zig-zag mark is at the bottom and not at the top like yours. Could the problem be as simple as the cam is seated incorrectly? Your machine was supposedly built between 1967-1972. Other people say it sews like a dream.
SewingSew is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Goodwitch@1980
For Vintage & Antique Machine Enthusiasts
0
01-25-2019 01:48 PM
grammasharon
For Vintage & Antique Machine Enthusiasts
13
03-18-2017 02:29 AM
QuiltFaerie
For Vintage & Antique Machine Enthusiasts
1
06-04-2014 01:54 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter