Go Back  Quiltingboard Forums > Main > For Vintage & Antique Machine Enthusiasts
Easy way to change out machines >

Easy way to change out machines

Easy way to change out machines

Old 03-11-2019, 10:00 AM
  #1  
Super Member
Thread Starter
 
Join Date: Mar 2016
Posts: 2,805
Default Easy way to change out machines

Basic question: Is there an easy way to switch out a 15-91 and a 201-2 in a cabinet? I want to keep both machines (and use them), but don't have room for two cabinets. They both have that black thingy that attaches to the cabinet and fills in the space that the wires go through. I can't figure a way around that. Would I just have to live with a hole there? (I hope that makes sense.)

bkay
bkay is offline  
Old 03-11-2019, 12:10 PM
  #2  
Junior Member
 
Join Date: Jul 2018
Location: SW Pennsyltuckey
Posts: 111
Default

The 'spring plate' is what I've heard it called; not sure if that's the correct technical term. I've seen cabinets where the plate was removed and an empty space left, and I've seen others that removed the spring plate and found (or made) a rectangular tray that slipped into that space. It's not needed in any way. Might be an opportunity to get creative with the space! =)

For a moment there, I thought you were asking about the rubber band method...

which I highly recommend.

Last edited by Steelsewing; 03-11-2019 at 12:13 PM.
Steelsewing is offline  
Old 03-11-2019, 02:38 PM
  #3  
Super Member
Thread Starter
 
Join Date: Mar 2016
Posts: 2,805
Default

I was talking about the spring plate. So, I see the answer is to remove the spring plate from the machine and live with the space or find something to fill it.

I had not seen that rubber band thing before, thanks.

Thanks Cari.

bkay
bkay is offline  
Old 03-11-2019, 09:09 PM
  #4  
Member
 
Join Date: Jul 2018
Posts: 89
Default

Dang I feel foolish! I don't know how many times I have fought those dang hinges, just to see that a rubber band is all I needed!
Thanks for the post
Friar_Tuck is offline  
Old 03-12-2019, 10:45 AM
  #5  
Super Member
 
leonf's Avatar
 
Join Date: May 2016
Location: near Topeka kansas
Posts: 4,524
Default

Gotta agree about hte rubber band. I've fought those way too many times.
leonf is offline  
Old 03-12-2019, 11:18 AM
  #6  
Super Member
Thread Starter
 
Join Date: Mar 2016
Posts: 2,805
Default

Originally Posted by Cari-in-Oly View Post
Bkay, why not just leave the plate there? Then there won't be a hole next to the machine.

Cari
So, as I understand it, you are suggesting that I remove the cords from the spring plate. Then, when I switch out the machines, I just push the cords through the area where the spring plate is?

The controller is hard wired to the machine on the 15 and also on the 201 I'm working on. Could you put some kind of connector on the controller wire so that you could just plug it in and not have to thread it through the spring plate opening?

bkay
bkay is offline  
Old 03-13-2019, 12:44 PM
  #7  
Super Member
 
tuckyquilter's Avatar
 
Join Date: Dec 2010
Location: SoCal
Posts: 1,859
Default

Originally Posted by Steelsewing View Post
The 'spring plate' is what I've heard it called; not sure if that's the correct technical term. I've seen cabinets where the plate was removed and an empty space left, and I've seen others that removed the spring plate and found (or made) a rectangular tray that slipped into that space. It's not needed in any way. Might be an opportunity to get creative with the space! =)

For a moment there, I thought you were asking about the rubber band method...

which I highly recommend.
OMG.. this is a terrific method! Why didn't I know about the rubber bands?
tuckyquilter is offline  
Old 03-13-2019, 01:19 PM
  #8  
Super Member
 
Join Date: May 2010
Location: Ontario, Canada
Posts: 1,779
Default

Steelsewing - Thanks for the link to the video! I never knew about using rubber bands to hold the pins - simple but a great idea!! Thanks!
costumegirl is offline  
Old 03-13-2019, 03:43 PM
  #9  
Super Member
Thread Starter
 
Join Date: Mar 2016
Posts: 2,805
Default

Originally Posted by Cari-in-Oly View Post
I think you might be over thinking this...

Cari
I could be guilty of that. It wouldn't be the first time.

Thanks, Cari.

bkay
bkay is offline  
Old 03-13-2019, 06:52 PM
  #10  
Junior Member
 
Join Date: Jul 2018
Location: SW Pennsyltuckey
Posts: 111
Default

Originally Posted by bkay View Post
I could be guilty of that. It wouldn't be the first time.
I've given this some thought and I think (?) I understand the dilemma: to be able to use one cabinet and easily swap out machine heads with little to no effort. Having the spring plate there or not there doesn't really assist all that much with wire disconnect and re-connect. You still have to unscrew the plug receiver screw, reach around and undo two of the twist nuts, remove the pedal/knee control wires... and then reverse all this when you slip in the other head. This would be particularly true with a 15-91 and 201 swap.

The easier (?) way to accomplish this would be if there were some other kind of way of removing those two wires and then reconnecting. If you were to say.... find a spot in the run of the wire from when it tucks into the hole on the spring plate... say 6 inches away from the hole on the inside of the cabinet.

Now, cut one of those two wires and add a splice, and then measure two to three inches from that splice and cut and splice the second wire. Then, add these wire connectors. You want to leave a a couple of inches between each splice one so that one end of the splice connector can easily slip through the hole in the spring plate.

You'll need to make one full set, and then another half set. Say you put the male splice ends on the sewing machine side, and the female on the knee control side. Now you need a duplicate set of male splice end wires for the second machine. This way... the wire sets stay connected to the machine. No fooling with wire nuts or loosening the plug receiver. It would save a lot of time and hassle and you'd be able to switch back and forth way easier.

[ATTACH=CONFIG]610234[/ATTACH]
Here's the idea on paper

and here's a link to the sort of wire splices that I could find online that might work.

Is this closer to what you had in mind?
Attached Thumbnails springplatesplice.jpg  
Steelsewing is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Serianas
Main
7
09-03-2015 10:10 AM
Favorite Fabrics
General Chit-Chat (non-quilting talk)
44
10-10-2013 07:46 AM
dogpursemaker
General Chit-Chat (non-quilting talk)
5
07-12-2011 03:39 AM
craftybear
Links and Resources
18
06-24-2011 07:08 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter