Go Back  Quiltingboard Forums > Main > For Vintage & Antique Machine Enthusiasts
Singer Clone - Ambassador/Damaged case >

Singer Clone - Ambassador/Damaged case

Singer Clone - Ambassador/Damaged case

Old 06-20-2014, 05:47 AM
  #1  
Junior Member
Thread Starter
 
Join Date: Feb 2013
Location: Southeastern Michigan
Posts: 136
Default Singer Clone - Ambassador/Damaged case

Good Morning!

I have been wanting to snag a Singer Clone and I finally got one. It was $11 on ShopGoodWill.com. The machine arrived and looks really good however, the base is damaged.

While I have been wanting to start working on restoring machines, now that I have one that needs help, where do I even start? I don't have tools but my mom still has all my dad's tools (lost him about 6 years ago) which I am sure I can raid.

I don't have a clue where to start. Is anyone interested in being my coach? I did see Joe's post about restoring a base. I may need to do this step by step and between working full time and keeping track of my 88 year old momma, it could take some time.

I know that my very first step is removing the machine from the base. I program computers for a living and have had to pull apart my long arm to make minor repairs. I can do this, I just need a mentor or coach.

What do you think? Will you guys help me on my journey?
Attached Thumbnails ambassador1.jpg   ambassador2.jpg   ambassador3.jpg   ambassador4.jpg  
QuiltFaerie is offline  
Old 06-20-2014, 07:23 AM
  #2  
Junior Member
Thread Starter
 
Join Date: Feb 2013
Location: Southeastern Michigan
Posts: 136
Default

Hopefully, my request for a mentor or coach is not out of line? I sure don't want to offend anyone.
QuiltFaerie is offline  
Old 06-20-2014, 07:33 AM
  #3  
Super Member
 
Join Date: Oct 2011
Location: dallas tx.
Posts: 5,172
Default

You aren't offending anyone. Someone will be along soon to help you. I can't, but there are lots of people on here who are willing to help.
barny is offline  
Old 06-20-2014, 07:35 AM
  #4  
Super Member
 
Join Date: Feb 2012
Posts: 8,091
Default

Gail,

If you want to switch to emails it will be easier and I'll help you all I can. We can stay here too if you want.

To fix the case, you take out the machine, 4 screws, then peal back or remove the fabric covering. Figure out where each piece goes then get some glue, I use Elmer's Carpenters Wood glue, and piece each part back where it came off of. I used lots of clamps to hold it together while the glue dried and I also use the barbed panneling nails to help. Them things hold good and won't back out.

As for the machine, brush out the lint and debris, clean off the excess old oil then re-oil. I use Tri-Flow to get the old oil flushed out of the linkage, shafts, bearings, and for the initial test runs. It's great stuff.

Joe
J Miller is offline  
Old 06-20-2014, 07:40 AM
  #5  
Junior Member
Thread Starter
 
Join Date: Feb 2013
Location: Southeastern Michigan
Posts: 136
Default

Joe, thank you! I will switch to email, unless anyone is interested in following my adventure in repairs?

I can do this, the problem is figuring out where to start and not screwing it up. I don't think the case is a complete goner but definitely needs help. The bottom is lose also. I will take a picture once I get the machine head out and can flip the case.

After I posted all the pictures I was worried that what I was asking for was inappropriate. It is one thing to ask a question and get help, another to hope that someone will help you with a project. Ugh.

Let me get the machine head out, and get some carpenter glue. I will go see if my dad also has some clamps hidden down on his work bench. He would love that I am doing this. If not, off to the hardware store to get some!
QuiltFaerie is offline  
Old 06-20-2014, 08:15 AM
  #6  
Super Member
 
Join Date: Feb 2012
Posts: 8,091
Default

Gail,

See if you can find some 3/16" plywood too. I'd suggest replacing the bottom with plywood and getting rid of the particle board stuff.

Joe
J Miller is offline  
Old 06-20-2014, 08:36 AM
  #7  
Senior Member
 
Join Date: May 2013
Posts: 613
Default

ooh, i have a little something to add. wipe down the outside with dish soap like dawn and water. just like washing a dish. then dry and start oiling. that way you remove some grime before really getting into the gritty stuff. :-)
foufymaus is offline  
Old 06-20-2014, 09:04 AM
  #8  
Junior Member
Thread Starter
 
Join Date: Feb 2013
Location: Southeastern Michigan
Posts: 136
Default

I think the machine head is good. The hand wheel turns freely. I have not tried turning it on yet. I was too whooped from work last night to do more than unpack and notice the damaged case.

Okay, I will pick up Tri-flow, Elmer's Carpenter Glue and 3/16" plywood and panel nails. This is going to be fun. Of course, I have come to the realization that I am not truly sane.
QuiltFaerie is offline  
Old 06-20-2014, 09:34 AM
  #9  
Super Member
 
amcatanzaro's Avatar
 
Join Date: Aug 2013
Location: Ohio
Posts: 1,079
Default

Originally Posted by QuiltFaerie View Post
I have come to the realization that I am not truly sane.
Then you are truly one of us.
amcatanzaro is offline  
Old 06-20-2014, 10:06 AM
  #10  
Junior Member
Thread Starter
 
Join Date: Feb 2013
Location: Southeastern Michigan
Posts: 136
Default

Originally Posted by amcatanzaro View Post
Then you are truly one of us.
Oh thank goodness! I was getting a little worried there.
QuiltFaerie is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
KBuchanan
For Vintage & Antique Machine Enthusiasts
3
09-15-2017 07:42 AM
joobee
For Vintage & Antique Machine Enthusiasts
13
02-11-2014 05:27 PM
jillaine
For Vintage & Antique Machine Enthusiasts
10
09-13-2013 04:20 PM
LauraJJ68
For Vintage & Antique Machine Enthusiasts
9
05-19-2012 11:48 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter