jmstorm

I bought this machine for $50 a week ago. It sews beautifully and I adore it! I have been scouring the internet trying to find more information on possible model number, accessories (if there were any) and the like. When I found this group, there seems to be multiple very knowledgeable people so I am hoping someone can help out. : ) I do have a friend in Japan who was able to tell me that the company who made it is still in business but I haven't found much researching the history of that company, Maruzen Mishin now known as Jaguar Mate. Could this be the Deluxe Machine from 1954 since Maruzen Mishin started in 1949? I found a list of Kenmore Models and it lists the Deluxe machines for 1938, 1939, 1948 and 1954. I know the Kenmore Model Plate on the back with 1120 is for the motor. I haven't found much on the Model CBI. On the bottom it has three different stamps, for lack of better word. J C3I, H - 4 and J-A36 ZR3718. I also have an acquaintance in Michigan who was able to send me a generic HA-1 Manual so I at least have a bit of information for threading purposes. Any and all information is welcome! : )
[ATTACH=CONFIG]601006[/ATTACH]

Mickey2

It would be intersting if anone has started gathering serial numbers and compared the Japanese models. The large export of Japanese machines began after WWII, and before that time I guess there were 15 clones in production. The very early Pine models look more like the European 15 clones, with the type of stitch length lever you find on Pfaffs and Husqvarnas. The European 15 clones had reverse lever by 1920s and some could drop the feed dogs too. It might be the reason Japanese clones incorporated these features on their machines after WWII. I guess the typical Singer stitch length lever with reverse appeared after 1954 when Singer bought into the Pine company?

You can't go by the "deluxe" badge on the early Kenomores, at least not alone. You will find all kinds of referance words like "deluxe", "automatic", "-omatic", between brands all of the 50s and 60s, not just Japanese. The 1930s Kenmores were US made, often rotary hook and race. The Japanese probably borrowed the words from existing names and brands. They largely aimed for the US marked.

Cari-in-Oly

What you have is a common 15 class clone. I don't think I've ever seen one with the Kenmore badge on it. The JA36 actually indicates it was built by Riccar, not Maruzen/Jaguar. This is a mid 50s clone going by features such as the striated face plate and the feed dog drop. I have two clones that look like yours, including similar decals. One is badged as a Brother and the other one is badged as a Morse. This machine takes common low shank feet, no need to look for Kenmore specific attachments and it most likely would have originally come with the generic HA1 manual(most clones did) so you're good to go there.

Cari

Mickey2

I forgot to add that none of the 15 clones are rotary, they are occilating hook, all variants and derivatives of Singers model 15. They start to appear just after 1900, at least they become more common then. Among the old straight stitchers there are a few rotary hook models, some US made ones; National, White, etc. They are per definition not 15 clones.

It's hard to date Japanese clones, the variants of them were made well into the 1960s, and can look pretty much identical to yours. Into the 50s you can see some with the tension in front and not on the face plate, some were given a more modern looking body, various ways to adjust feed dog height, turn knob, push buttons, etc.

Steelsewing

The only thing I'd add to all these very knowledgeable comments is that it appears as though Sears & Roebuck were having their Kenmore line of sewing machines made almost exclusively by either White Manufacturing of Cleveland Ohio or New Process Gear Corporation of Syracuse New York until about 1955 when other manufacturers began to enter the scene.

In 1957 the first full line of various Japanese made sewing machine models labelled as Kenmore were offered to the US public. These machines appear to have been made exclusively by either Mauzsen (158 designation) or Soryu (148 designation). White officially lost it's contract in '58, New Gear continued to '62. Some evidence suggests that one or two specific machine models may have been made for Sears in Japan prior to 1957... but it's difficult to find documentation. White did attempt a short lived 15 clone look-a-like in 1956... but it was replaced by 1957 with a Japanese made machine. Considering this part of Kenmore history, I'd go out on limb and suggest that the earliest possible year of manufacture for your machine should be 1957, and even then... that might be too early. Your machine, with that feed dog drop dial appears identical to the Kenmore 'Commander 30' and 'Challenge' models manufactured a few years later.

jmstorm

Thank you for the information! I have not found such a list but would love to see one if there is one.

jmstorm

Thank you for the information! I have heard of a JA list floating around but have not seen it. My friend in Japan probably just researched Kenmore in Japan and went with the first thing that came up. I do have a few 158 Kenmores. So they are the ones from Maruzen most likely? My mom has a Kenmore 158.17821 that she loves. She's who got me started with Kenmores. I was so excited to find this one! I had been looking for a Kenmore HA-1 and thought it would be slightly bigger than this one so didn't think this was one until I spoke with my friend in Michigan. I am thrilled to have one now. : )

jmstorm

Thank you! I have seen the Challenge model but don't know much about it. I have run into the same thing with finding information. It seems to be scarce for sure.

Steelsewing

You know... we are looking for someone with feet in Japan that might be able to research the blank spaces in the JA and JC lists... there are gaps where we have no information at all.

My favorite JA/JC and extensive Kenmore model list can be found on a fellow researchers page here:

http://www.doubleveil.net/zssmp/resources.htm