Vintage Sewing Machine Shop.....Come on in and sit a spell
10-23-2011, 04:04 PM
Super Member
Join Date: Nov 2010
Location: Calif (San Joaquin Valley)
Posts: 3,482
Still working on the tension. I think I should take the tensioner assembly off & clean it. Project for another day though. Plus I'm just using the handwheel. Don't want to plug it in until DH checks the wiring for me.
She did clean up easily & nicely.
She did clean up easily & nicely.
10-23-2011, 04:07 PM
Super Member
Join Date: Mar 2010
Location: Huntsville, AL
Posts: 2,609
Originally Posted by QuiltnCowgirl
Still working on the tension. I think I should take the tensioner assembly off & clean it. Project for another day though. Plus I'm just using the handwheel. Don't want to plug it in until DH checks the wiring for me.
She did clean up easily & nicely.
She did clean up easily & nicely.
Glenn
10-23-2011, 04:13 PM
Super Member
Join Date: Dec 2008
Location: St. Louis, Missouri
Posts: 6,884
Pretty red eye!
10-23-2011, 04:13 PM
Senior Member
Join Date: Aug 2011
Location: Take time for God today
Posts: 966
looks nice and shiny! Pretty!
10-23-2011, 04:18 PM
Super Member
Join Date: Apr 2010
Location: West Virginia
Posts: 1,049
Originally Posted by QuiltnCowgirl
Still working on the tension. I think I should take the tensioner assembly off & clean it. Project for another day though. Plus I'm just using the handwheel. Don't want to plug it in until DH checks the wiring for me.
She did clean up easily & nicely.
She did clean up easily & nicely.
10-23-2011, 04:33 PM
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,507
Originally Posted by MrsBoats
Anybody know anything about--or have an opinion on--an Elgin Riccar sewing machine? I used to have a Riccar and liked it, but traded up for my Pfaff 130. But I didn't know that Elgin and Riccar were related. This one is a free arm, metal body/unknown innards, with a manual and "some stuff", for $35. I'm sorta interested, but it's an hour from here, and I don't *really* need another machine...
10-23-2011, 04:35 PM
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,507
Originally Posted by Celeste
I finally found a treadle at a decent price, (and close by!) but now I need to know what kind of questions to ask. Do they use bobbin cases?
http://sfbay.craigslist.org/sby/atq/2654035563.html
If it works out, then I need to figure out how to get it home... I doubt it will fit in my Geo Metro!
What kind of needles?
http://sfbay.craigslist.org/sby/atq/2654035563.html
If it works out, then I need to figure out how to get it home... I doubt it will fit in my Geo Metro!
What kind of needles?
10-23-2011, 04:37 PM
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,507
Originally Posted by QuiltnCowgirl
Originally Posted by Charlee
Originally Posted by QuiltnCowgirl
I finally scored!!
The presser foot is at a slant to the right and the needle hits it. I tried the regular foot & the zipper foot. Tried to take some pictures. Don't know if they help explain the problem, but worth the try.
Any suggestions? Especially since, as Charlee observed, this might not be the original needlebar.
10-23-2011, 04:39 PM
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,507
Originally Posted by Charlee
Originally Posted by QuiltnCowgirl
Originally Posted by Charlee
Originally Posted by QuiltnCowgirl
I finally scored!!
The presser foot is at a slant to the right and the needle hits it. I tried the regular foot & the zipper foot. Tried to take some pictures. Don't know if they help explain the problem, but worth the try.
Any suggestions? Especially since, as Charlee observed, this might not be the original needlebar.
I'd pull the faceplate and make sure everything there is tight where it should be, and check for bends or warps in the presser bar...
After that, I'm not sure what to tell you! I do know that from what I've read, it seems fairly simple to switch it out...
10-23-2011, 04:48 PM
Senior Member
Join Date: Sep 2010
Location: North Texas
Posts: 486
Originally Posted by gypsyquilter
first, let me say this link is such a BAD influence on me. Since I started reading it I bought a '47 featherweight and a '22 hand crank! Then I Started the hunt for a red eye treadle, that was the only one I wanted and the last vintage machine I would buy. I saw one this weekend on CL for $450 - WAAAY out of my price range. Then I saw one on ebay for local pick up only, but it was in Illinois, i'm in Texas - thus you see geographical problem :-) i was lamenting to my wonderful hubby that I may be on the forever-for-nothing search for a read eye treadle, when he said, bid on it, if you win, we'll go get it together (gosh, i LOVE this man!). So, I did, I won, we went! Here she is in all her glory, and her fantastic price of $56, she's a 1910. if that wasn't' great enough, the person who sold her also had a "portable" singer and asked was I interested!. I bought that machine for $20. I need your help, I have no idea what type of machine this tiffany decal machine is, her wooden cabinet is in rough shape but the machine looks great, she's a 1916. there is a hamilton beech motor attached to the back of this machine, I plan to take it off an make it a hand crank. Any ideas what type of machine she is?
Texas Jan
Thread
Thread Starter
Forum
Replies
Last Post
Stitchnripper
Main
5
10-17-2018 09:01 AM
AngieS
Main
38
10-06-2011 10:06 PM
craftybear
Offline Events, Announcements, Discussions
34
09-09-2011 12:36 PM
